PHYML pressure foam tank Fire foam fire extinguisher Service conditions Fire foam fire extinguisher

Description :

　　The pressure type foam proportioning device is used to store foam extinguishing agent and replace foam extinguishing agent through the pressure type foam proportioner using the water supply of the pump set, and mix with the water supply in a certain proportion to form foam mixture.

　　The PHYML series pressure type proportioning device produced by Shandong Dongyue Crane Fire Fighting Equipment Manufacturing Co., Ltd. is called vertical foam tank for short. It is produced in strict accordance with national standards, with advanced technology, mature technology, complete models and stable performance. The PHYML series pressure type proportioning device is suitable for all kinds of foam liquid with a mixing ratio of 3% or 6%; The flow of mixed liquid is 24-80L/S, the volume of foam tank is 1000L-10000L, and the mixing ratio of foam is generally 3% or 6%.

　　The pressure type foam proportional mixing device is a common foam extinguishing equipment at present. The pressure type foam proportioning device is easy to install, use and maintain, with excellent built-in corrosion resistance, relatively economical cost, stable and reliable performance, and is especially suitable for medium and small flow foam fire extinguishing systems. Mainly applicable to places where flammable or combustible liquids are produced, stored, transported, and used; Fire hazard areas such as petrochemical enterprises, oil depots, loading and unloading docks, ship docks, oil extraction platforms, aircraft hangars, and automobile garages.

　　Regarding the usage conditions of the PHYML series pressure proportional mixing device of Shandong Dongyue Crane and Fire Equipment Manufacturing Co., Ltd.:

　　1. The pressure of the fire pump matched with the mixing device must meet the requirements of the inlet working pressure of the mixer.

　　2. The working pressure range of the device is 0.6~1.2MPa, which cannot be used beyond the specified range of use, otherwise the mixing ratio will be affected and the quality of foam will be reduced.

　　3. The pressure used by the mixing device within the calibrated working pressure range depends on the working pressure of the matched foam extinguishing equipment and the magic resistance loss of the equivalent length of the pipeline.

　　4. In standby mode, all valves in the mixture should be closed.

AfterSalesService :

• PHYML pressure foam tank