Industrial fire fighting equipment foam fire hydrant Ground fire hydrant foam fire fighting equipment price model

Description :

　　A fire hydrant, officially known as a fire hydrant, is a fixed fire-fighting facility primarily used to control combustibles, isolate combustibles, and eliminate ignition sources. Divided into indoor fire hydrants and outdoor fire hydrants.

　　Foam hydrant is a special fire-fighting equipment installed on foam mixture pipe to supply foam mixture to foam spraying equipment.

　　Foam fire hydrant is mainly composed of flange, cylinder, ball valve, internal connection, fire pipe thread and end cover.

　　The ground foam fire hydrant can be divided into three models: PSS80-65X2, PSS100-65X2 and PSS150-65X2 according to the flange interface. The rated working pressure of foam fire hydrant is within 1.6MPa.

　　The use and maintenance of fire hydrants should pay attention to the following points:

　　1. Regularly inspect the fire hydrant, check the opening size of the cover, remove dirt, check if the seal is intact, and repair any paint peeling.

　　2. Check and clean up any obstacles to the fire hydrant.

　　3. Fire hydrants are usually closed, and a special wrench should be used to turn them on. After each use, a drainage valve should be used to drain the remaining water to prevent freezing and damage to the hydrant body. Especially in severe winter, attention should be paid to cold prevention, and the fire hydrant should be closed to prevent freezing and cracking of the hydrant body

　　4. When closing the fire hydrant, if it is not tightly closed, it should be loosened several times and rinsed with clean water before closing. It is strictly prohibited to close it forcefully or damage the components of the hydrant.

AfterSalesService :

• Industrial fire-fighting equipment