Fire foam tank manufacturer direct selling foam fire extinguisher price large capacity cubic foam fire extinguisher

Description :

　　Shandong Dongyue Crane Fire Fighting Equipment Manufacturing Co., Ltd. mainly produces foam tanks (pressure type proportional mixing device), fixed fire monitors, fire water monitors, fire turrets, low expansion foam generators, foam water dual-use monitors, foam hydrants, ground fire hydrants, ground quick opening pressure regulating fire hydrants, foam guns, mobile foam fire extinguishing devices, mobile fire monitors, remote control electric fire monitors, closed foam water sprinkler fire extinguishing devices, mobile foam tanks (semi fixed foam fire extinguishing devices), including foam fire extinguishing equipment, water fire extinguishing equipment, automatic fire extinguishing equipment, sprinkler cooling fire extinguishing system and fire fighting equipment accessories.

　　The fire protection products produced by Shandong Dongyue Crane and Fire Equipment Manufacturing Co., Ltd. are widely used in industrial fire protection in public places and fire departments such as PetroChina, Sinopec, CNOOC, shipbuilding, mobile communication, tunnel transportation, tobacco, electricity, airports, shopping malls, etc.

　　All products of the company have not only obtained certification from the State Administration of Quality Supervision, Inspection and Quarantine, China Fire Products Qualification Assessment Center, but also "3c" quality certification; We have also obtained ISO9001 international quality management system certification.

　　The PHYML series pressure type proportioning device produced by Shandong Dongyue Crane Fire Fighting Equipment Manufacturing Co., Ltd. is called vertical foam tank for short. It is produced in strict accordance with national standards, with advanced technology, mature technology, complete models and stable performance. The PHYML series pressure type proportioning device is suitable for all kinds of foam liquid with a mixing ratio of 3% or 6%.

　　The PHYML series pressure type proportioning device produced by Shandong Dongyue Crane and Fire Equipment Manufacturing Co., Ltd. mainly consists of a tank body, proportioning mixture, inlet pipeline, outlet pipeline, drainage valve, discharge valve, safety valve, and pressure gauge. Each pipeline is equipped with a valve, and a pressure gauge is installed on the inlet pipeline, which is installed inside the tank. Its inner cavity and tank cavity are independent of each other.

　　The characteristics of the PHYML series pressure proportional mixing device produced by Shandong Dongyue Crane and Fire Equipment Manufacturing Co., Ltd. are as follows:

　　1. The foam mixing ratio is accurate and reliable, the sprayed foam liquid has strong penetration ability and high fire extinguishing efficiency.

　　2. The unused foam liquid can be used continuously to save foam liquid and reduce costs.

　　3. It has a wide scope of application, and can be used for high, medium and low expansion foam extinguishing agents.

　　maintenance and upkeep

　　1. Before use, check whether the flange cover and connecting pipe flange on the "foam tank filling port" are sealed and whether various valves are closed.

　　2. After each use, the storage tank and pipeline must be rinsed clean with clean water, and the inner and outer surfaces must be repainted and treated for corrosion prevention.

　　3. When filling foam liquid, the tank shall be kept clean, and shall not be mixed with oil or other foam liquid, and shall not be mixed with aging foam liquid. The model of foam liquid shall not be wrong.

　　4. Foam concentrate should be kept away from direct sunlight and stored in a place with small temperature difference. Direct contact with air should be minimized. Any foam liquid stored beyond the validity period shall be sampled and inspected before use, and can be used only after it is qualified. The invalid foam liquid shall be replaced in time.

　　5. Storage tanks equipped with membranes should undergo a leak test every six months. The test method is to open the drain valve D, if there is foam leakage, it is proved to be damaged, and it should be repaired or replaced in time.

　　6. When replacing the foam liquid, a simulation test shall be carried out on the fire extinguishing system to check whether the working conditions of the proportional mixing device, foam generator and other equipment are normal and reliable. If there is any abnormality, it shall be repaired in time.

　　7. When replacing the invalid foam solution, the device should be thoroughly cleaned. The cleaning method is:

　　① First, open the bottom valve E to drain the expired foam liquid.

　　② Close valve D and fill it with clean water from the filling port to clean the inner surface; Then open valve E, connect compressed air from valve C to extrude foam liquid, continue to blow with compressed air for 30 minutes, thoroughly dry the water inside, and refill foam liquid.

　　8. In actual use, the storage tank must be filled with foam liquid.

　　Shandong Dongyue adheres to the professional spirit of practical innovation, upholds the concept of "honesty, trustworthiness, and win-win cooperation", and wholeheartedly provides excellent services to domestic and foreign customers. We warmly welcome friends from all walks of life to visit, guide and negotiate business.

　　Shandong Dongyue sincerely joins hands with our customers to create a brilliant tomorrow!

AfterSalesService :

• Fire foam tank manufacturer direct sales