Manual outdoor antifreeze fire hydrant, above ground water supply fire hydrant, use and maintenance of fire hydrant

Description :

　　The SSFT series above ground fire hydrant produced by Shandong Dongyue Crane Fire Equipment Manufacturing Co., Ltd. is an outdoor above ground fire hydrant. The product models include SSFT100/65-1.6, SSFT150/65-1.6, and SSFT150/80-1.6. The hydrant body is made of carbon steel material and comes with a fire wrench. The standard height is 1.7 meters, and it can also be customized according to customer needs.

　　The use and maintenance of fire hydrants should pay attention to the following points:

　　1. Regularly inspect the fire hydrant, check the opening size of the cover, remove dirt, check if the seal is intact, and repair any paint peeling.

　　2. Check and clean up any obstacles to the fire hydrant.

　　3. Fire hydrants are usually closed, and a special wrench should be used to turn them on. After each use, a drainage valve should be used to drain the remaining water to prevent freezing and damage to the hydrant body. Especially in severe winter, attention should be paid to cold prevention, and the fire hydrant should be closed to prevent freezing and cracking of the hydrant body.

　　4. When closing the fire hydrant, if it is not tightly closed, it should be loosened several times and rinsed with clean water before closing. It is strictly prohibited to close it forcefully or damage the components of the hydrant.

AfterSalesService :

• Manual outdoor antifreeze fire hydrant