Fire fighting foam tank foam extinguishing device Fire fighting equipment produced and sold by ourselves

Description :

　　Semi solid foam fire extinguishing device, also known as trolley foam fire extinguishing device, is a new mobile foam fire extinguishing device with quick, simple operation and strong reliability Used to extinguish Class A, B, and C non water soluble liquid fires. It is widely used in municipal residential areas, factories and mining enterprises, oil depots, chemical departments, heat treatment workshops, gas stations and other places, mainly composed of foam liquid tanks, spray guns, proportional mixers, water hoses, and trolley chassis

　　feature

　　1. The mixing ratio of foam tank is quite stable, accurate and reliable, which can provide high-quality foam mixture. 2. The pressure drop of foam tank is small, and the sprayed foam extinguishing agent has large energy and strong penetration ability. Can quickly extinguish fires. 3. Save foam liquid and reduce fire extinguishing cost. Because foam tank separates foam liquid from water, foam liquid is not used up at one time, and can be used again next time, and the mixing precision is stable and reliable.

　　4. It has a wide scope of application, and can be used for high, medium and low expansion foam extinguishing agents. The foam proportioning device of the automatic foam extinguishing system can use both foam sprinklers and sprinkler heads, and can be linked with the automatic alarm.

　　Maintenance of semi solid foam fire extinguishing device:

　　1) Filling of extinguishing agent: after the equipment is used, the user must purchase the same type of foam liquid for filling; When canning, plastic tubing can be used for inhalation or a funnel can be used for injection from the filling port; Tighten the filler cap after filling to prevent foam liquid from splashing out when the equipment is moving.

　　2) The equipment should be placed in a cool, ventilated, and easily accessible location.

　　3) The tank material of this equipment is made of corrosion-resistant fiberglass material It is strictly prohibited to use hard objects to knock or collide, causing damage to the tank body and resulting in leakage.

　　4) If the equipment has not been used for a long time, the quality of foam concentrate should be rechecked once a year to see if it has deteriorated If any deterioration is found, it should be replaced in a timely manner

　　5) After each use of this device; The fire hose should be carefully cleaned and dried before being wrapped around the equipment reel (it is recommended that users bring their own spare fire hose to prevent sudden fire incidents).

　　6) In order to keep the equipment in a good fireproof state for a long time and the quality of foam liquid in the tank; Foam storage tank shall be opened and cleaned every 3 years

　　7) When the water supply source is a motorized hydraulic pump or a fire water tank truck, the water supply pressure should not exceed 1.0MPa. When purchasing equipment, it should be equipped with a self scoop fire hose that can withstand a working pressure of 1.0MPa.

AfterSalesService :

• foam canister