Smart heating solution, heating wireless meter reading, IC card meter reading system mode

Description :

Qingdao Hesheng CompanySmart heating solution, heating wireless meter reading, IC card meter reading system modeSmart Decision Analysis: Customize reports based on the needs of the company's management decision-makers, and provide targeted analysis to assist in business decision-making. 1. Real time and historical data collection and analysis of total steam supply and consumption; 2. Analysis of year-on-year and month on month data on total steam supply, steam consumption, various branch lines, and heat users; 3. Analyze the year-on-year and month on month data of steam consumption of heat users by industry, and analyze the proportion of steam consumption in each industry in the heating network; At the same time, based on the impact of market conditions on the industry and the historical situation of industry gas consumption, analyze the changes in gas consumption in the future period.

　　4. The energy consumption analysis system can calculate the energy consumption of heat sources, comprehensive energy consumption of heating, and energy consumption of pipeline losses. At the same time, it provides a large number of analysis models and tools, which can compare the energy consumption of the same period in the history of the enterprise, as well as compare it with the same enterprise. 5. Boiler steam charging management valve closing function: After the purchased steam volume is used up, the valve will automatically close. The valve closing action can be set according to the actual situation, such as closing 50%, 40%, or 30%, and the specific value is set by the user themselves. Power outage protection function: The original data can be saved for ten years in the event of a power outage. The traditional meter reading method uses a pure manual reading mode during the meter reading process, while the final measurement cost result is also in manual mode in the later stage. System security permission setting function: Permission setting provides complete security authentication, and users cannot enter the system. Legitimate users can perform corresponding operations according to their permissions

　　Qingdao Hesheng CompanySmart heating solution, heating wireless meter reading, IC card meter reading system modeAdvantage:

　　1. On site operation data 4G real-time upload: 4G wireless communication terminals are responsible for the important task of data transmission, and can upload on-site data to the heating network service center in real time to track and monitor the thermal parameters (pressure, temperature, flow rate, etc.) of the heating network, and grasp the heating status of the entire heating network management line. 2. Flexible networking and rapid deployment: Wireless networking mode has the characteristics of flexible networking, high data transmission rate, wide signal coverage, strong real-time performance, high security, low operating cost, and low maintenance cost; Suitable for situations where equipment is widely distributed and it is inconvenient to install network cables, wireless networking can achieve data transmission without geographical limitations as long as the operator's network coverage is available, shortening the project deployment cycle. 3. Fault diagnosis and analysis, timely fault reminder: on-site collection and measurement instrument failures can also be detected in a short period of time, and the fault time can be recorded and filed to avoid measurement losses and eliminate the idea of users stealing steam. In case of power outages or abnormal collection parameters at the hot user end, information can be timely predicted and personnel can be reminded to handle them through platforms or methods. 4. Remote operation and maintenance management, reducing operation and maintenance costs: Management personnel can see the steam usage of users in various places in the management background, without the need for on-site manual meter reading. Fault report information is convenient for maintenance personnel to check and repair in a timely manner, reducing and saving a lot of manpower and material resources

　　5. Valve regulation function 2 of steam metering management system: over flow limit function. When the flow exceeds the set value, the valve opening will be automatically reduced. The small flow valve closing function automatically closes the valve when the flow rate remains below the set value for a period of time, and the fault automatic reporting function: the monitoring point automatically reports the fault information to the monitoring center and prints the report information automatically. The faults detected automatically include: communication failure of flow meter, 220V AC power outage, IC card failure, etc

　　Qingdao Hesheng Zhiyuan Automation System Co., LtdSmart heating solutionSystem Introduction:

　　1. Establishment of a prepaid steam metering management center;

　　2. Installation, commissioning, and data transmission of 100 sets of prepaid steam metering equipment;

　　3. The wireless data collection system opens up 100 remote measurement points, with N measurement points used in the first phase, and the excess part reserved for later expansion preparation;

　　4. According to the steam parameters provided by Party A, the rated pressure is 2.5Mpa, the upper temperature limit is 320 ℃, the working pressure is 1.2Mpa, and the working temperature is 300 ℃. This data is an important parameter for us to choose a flow meter.

　　5. The steam prepayment system has the characteristics of fast, real-time, etc., and can complete the entire meter reading task. Generally composed of a system master station and measuring instruments, valve adjustment function 1: In manual mode, after inserting the equipment card, the valve opening can be adjusted through the keyboard. In automatic mode, after recharging, the valve will automatically slowly open. Equipped with remote control mode, the valve opening can be adjusted through the upper computer. After the establishment of the system, the unified reading time of meter values was achieved, changing the original 15-30 minute manual reading time, achieving fairness in assessment while reducing the labor intensity of personnel, reasonably allocating resources such as personnel, finance, and materials, improving efficiency, and realizing economic benefits

Smart heating solution, heating wireless meter reading, IC card meter reading system modeA remote meter reading system based on low-power Internet of Things, comprising a terminal meter reading node, a centralized procurement node, a cloud server, a centralized meter reading management platform, and user terminals. The intelligent heating solution terminal meter reading node collects user meter data, sends the data packet to the centralized acquisition node, the centralized acquisition node and the terminal meter reading node establish a one to many communication mode, and wirelessly transmits the data collected by multiple terminal meter reading nodes to the cloud server. The centralized reading management platform connects the cloud server through the Internet, processes the data collected by the terminal meter reading node, and sends instructions according to the status of the terminal meter reading node. The terminal meter reading node sets a wake-up mechanism, receives instructions and controls the data acquisition module and communication module responses through its main control module. Users can receive payment reminders and view water/electricity/gas/heat information based on the user terminal. Data copying function: The main station implements centralized copying of meter readings. Automatically collect meter data and other information from the concentrator according to the set reading interval and reading cycle, and have real-time random calling and address selection functions. Automatic fault reporting function: The monitoring point automatically reports the fault information to the monitoring center and prints the report information automatically. The faults detected automatically include: communication failure of flow meter, 220V AC power outage, IC card failure, etc

　　Qingdao Hesheng Zhiyuan Automation System Co., Ltd

　　189 Hui Xin 5483 Same number 1481

　　Q：3438-5007-67

AfterSalesService :

• Smart heating solution