Solid liquid separator, dry wet separator, spiral extrusion solid-liquid separator

Description :

　　Solid liquid separator, dry wet separator, spiral extrusion solid-liquid separator

　　The wet dry separator is a type of dewatering machine for animal manure, medicinal residue, and wine residue. It can separate pig manure, duck manure, cow manure, chicken manure, and other raw animal manure into liquid organic fertilizer and solid organic fertilizer. Liquid organic fertilizer can be directly used for crop utilization and absorption, while solid organic fertilizer can be transported to fertilizer deficient areas for use and can also improve soil structure. At the same time, it can be fermented to produce organic compound fertilizer. Using a mud pump, the raw sewage is sent into the machine, and solid substances are squeezed and separated through a screw shaft placed in a sieve. The liquid then flows out from the outlet through the sieve. This machine can also be widely used for the separation of high concentration organic wastewater from animal manure, distiller's grains, medicinal residues, starch residues, sauce residues, slaughterhouses, and various intensive breeding farms for chickens, cows, horses, and other livestock.

　　Job characteristics and technical requirements: The spiral extrusion solid-liquid separator is mainly composed of equipment such as the host, unobstructed pump, control cabinet, and pipeline. The components of the host organism, mesh screen, extrusion winch, vibration motor, reduction motor, counterweight, and unloading device. The working process is as follows: the non clogging pump pumps unfermented pig manure into the body, accelerates the feeding under the action of the vibration motor, and gradually pushes the manure water forward of the body through power transmission, while continuously increasing the pressure at the leading edge, forcing the moisture in the material to be squeezed out of the mesh screen and flow out of the drainage pipe under the filtering effect of the edge pressure belt. The operation of the extruder is continuous, and the material is continuously pumped into the body. The pressure at the leading edge increases continuously. When it reaches a certain level, the discharge port is pushed open to extrude the extrusion port, achieving the purpose of extruding the material. In order to control the speed and moisture content of the discharge, the counterweight block below the main engine can be adjusted to achieve a satisfactory and appropriate discharge state. The spiral extrusion solid-liquid separator has high automation level, simple operation, easy maintenance, large daily processing capacity, low power consumption, and is suitable for continuous operation. Its key components are made of stainless steel material, with a total weight of nearly half a ton and small external dimensions. It is an ideal solid-liquid separation equipment for large-scale pig farms, which can greatly improve solid-liquid separation and efficiency. But at the same time, there are strict requirements for many factors such as drainage technology, environmental characteristics, capacity and structure of manure storage tanks, and drop height of manure drainage ditches in poultry and livestock farms.

　　Firstly, there is a minimum requirement for the separated material, which should be unfermented fecal water. From the perspective of process requirements, a fecal water storage tank should be built to store the fecal water. If it is found that the concentration of the fecal water to be separated is too dilute and its solidified content is less than 3%, using an extruder will greatly reduce the discharge efficiency. In order to improve the efficiency of solid-liquid separation, it is required to build a sedimentation tank with a capacity of 30 cubic meters to 40 cubic meters in front of the storage tank. This tank is slightly higher than the storage tank and has an overflow port above it, allowing the relatively dilute manure to overflow from the high position. The bottom of the tank will correspondingly deposit more concentrated materials, and then solid-liquid separation can greatly improve the discharge speed. The livestock manure treatment machine (also known as the livestock manure dewatering machine, livestock manure solid-liquid separator, livestock manure urine water separator) can pump the livestock manure from the manure tank through a dedicated submerged non plug cutting pump

　　Solid liquid separator, dry wet separator, spiral extrusion solid-liquid separator

AfterSalesService :

• solid-liquid separator