Feed mixer, self-priming grain crushing mixer manufacturer

Description :

　　Feed mixer, self-priming grain crushing mixer manufacturer

　　Feed crushers are divided into self-priming feed crushers and forced feed crushers, while feed mixers are divided into two types: vertical feed mixers and horizontal feed mixers. The commonly used mixer models include 500 type and 0 type, with a mixing quantity of 500 kilograms and 0 kilograms per batch. 1. The structure of the crusher has two types: automatic suction and forced feeding (depending on the model, the crusher can be selected and used). When the material is sucked in or sent into the crushing chamber, it is quickly crushed into powder or particles under continuous impact and collision of the hammer, and then subjected to centrifugal force or airflow, discharged into the impeller chamber below the crusher through the sieve hole. 2. Mixing mechanism: When the material pusher rotates, the impeller chamber of the material hopper is forcibly fed into the material conveying pipeline, and then lifted to the top of the mixing bucket by the pusher. At this time, the material is evenly scattered into the mixing bucket, and the rise and fall of the material in the mixing bucket and the left and right rotation continue to form a mixing process, thus achieving a uniform mixing effect.

　　Product parameters and price: HS-0.15 production capacity (kg/h) 200 power 3Kw HS-0.3 production capacity (kg/h) 400 power 3Kw HS-0.4 production capacity (kg/h) 500 power 4Kw HS-0.5 production capacity (kg/h) 600 power 5.5Kw HS-1 production capacity (kg/h) 0 power 7.5Kw HS-1.5 production capacity (kg/h) 1500 power 11Kw. Each mixing time is 10-15 minutes. If the materials are different, the mixing time can be determined according to the materials. 1. Fixed unit: When installing the unit, the unit base should be placed horizontally (if uneven, a wooden board can be used to level it), otherwise it is easy to cause unit vibration. 2. Check all connecting parts, whether the bolts are loose, manually push the shaft, check for any jamming and whether the pushing is flexible, and whether the crusher rotor hammer is flexible,. 3. The power supply, switch, and wires should be insulated for easy control. Do not use fuses or fuses that do not meet the rated current of the motor that is matched with the unit. Motors above 4.5KW must be equipped with overload protection devices. 5. Check the rotation direction of the motor for an empty machine (without matching). The motor should rotate in the direction specified by the arrow on the label, otherwise it may damage the machine. If the direction is not correct, you can exchange the positions of any two joints of the motor. 6. Check the tension of each transmission belt (the motor can move left and right, and the AB impeller can move forward and backward) to ensure it is appropriate. 7. Check whether there is any powder leakage at the connecting parts of the feeding pipe and mixer, and inspect the main hopper and propeller for any debris through the observation hole. If there is no debris, it is normal. 8. One machine warehouse is used to prepare feed for one batch. Weigh out the materials required for mixed feed. Start the mixing motor first, then start the crushing motor (otherwise the impeller will get stuck and the motor will burn out). Feed the materials that do not need to be crushed from the auxiliary hopper, and add the materials that need to be crushed to the fried rice cake crusher. Repeat the process on both sides until all the main and auxiliary materials are processed. Continue stirring for 5-10 minutes to complete one cycle. After the finished products are bagged, proceed to the next batch of production. Attention: Raw materials with small amounts added must be gradually expanded. 9. It is necessary to promptly remove impurities, metals, and sand from the materials to avoid damaging the components

　　1. The unit must have grounding and leakage protection devices to ensure the personal safety of the staff. When the machine is running, it is strictly prohibited to insert wooden sticks or iron riders into the machine, and the machine maintenance door must not be opened. When the feeding port is blocked, do not forcefully feed materials such as hands, wooden sticks, iron bars, etc. The machine can be paused until the feeding port is cleaned before continuing to work. 4. Generally, do not start the unit with load. When the machine is running normally, adjust the control plug to the appropriate position, and feed the main and auxiliary materials evenly, with the motor not overloaded. 5. When replacing screens with aperture less than 4 millimeters, the feeding plate set on the feeding tube should be adjusted appropriately, otherwise the feeding may easily get stuck on the grinding disc, damage the bottom of the screen, burn out the motor and electrical components, etc. 6. The unit should be installed in a well ventilated and transparent area away from sources of fire.

　　Feed mixer, self-priming grain crushing mixer manufacturer

AfterSalesService :

• Feed mixer