Qinghai non selective forage silage reclaimer, mobile grass scraper equipment, horizontal silage reclaimer

Description :

　　Firstly, before starting work, it is necessary to check whether there is any looseness between the various components of the equipment. For safety and to avoid accidents, if looseness is found, it should be tightened and dealt with in a timely manner;

　　Secondly, it is necessary to inspect various components of the machinery, such as whether the rotation of the spindle is flexible enough. If there is any jamming, the cause should be identified and promptly eliminated; Check if there are tools or other obstacles in the feeding process, and clean them up promptly if there are any; Check if it meets the requirements of the job. Turn on the machine and let it idle for a few minutes before it can work normally;

　　After completing the homework, the staff should bring some cleaning tools to clean up in a timely manner to ensure the normal progress of the work.

　　The most commonly used fuel for green energy storage engines is diesel. When used for a long time, it is easy to accumulate dust. If too much dirt accumulates, it will cause the performance of the diesel engine to decrease, fuel consumption to increase, engine temperature to decrease, damage the normal clearance of the parts, wear and erosion of the deceleration machine, and even cause some problems. Therefore, it is necessary to clean the dirt in a timely manner.

　　The methods for cleaning are as follows:

　　1. The editor reminds that newly purchased diesel should be left to settle for 96 hours before use. When refueling, add a filter to the funnel and a layer of silk cloth.

　　2. Regularly clean the storage machine to prevent rusting, and if there is excess, apply touch up paint to prevent corrosion.

　　3. The lubricating oil for the corn green storage machine should be prepared, and the filter element of the oil filter should be cleaned regularly.

　　Our company accepts customer customization and can provide a quotation based on specific details! Its handling performance is as follows:

　　1、 The machine is equipped with a built-in feeding box to facilitate the smooth delivery of silage and yellow stored feed into the feeding truck.

　　2、 Harvesting can be done freely without the need for crop height or lodging conditions.

　　3、 Control the hydraulic cylinder to adjust the cutting table up and down to the appropriate position based on the required cutting height and ground level. There is also a high and low positioning device for the cutting table,

　　Can accurately determine the cutting height.

　　4、 The hydraulic continuously variable transmission device can control the driving speed at any time.

　　5、 Small turning radius, capable of towing a trailer and opening its own way into the harvesting area. The straw crushed by corn storage machine can also be used for cultivating edible fungi,

　　Like mushrooms, reusing straw is not only beneficial for protecting the environment, but also reduces the cost of raising livestock

AfterSalesService :

• Non selective forage silage reclaimer