Anhui fully hydraulic open door mixer, all day grain mixing machine, twin-screw TMR mixer

Description :

　　The cyclic action horizontal shaft mortar mixer consists of a mixing drum, mixing shaft, transmission device, chassis, etc. The mixing shaft is horizontally placed inside the trough shaped mixing drum, and several sets of mixing blades are installed on the radial arm of the shaft. With the rotation of the shaft, the mixture in the mixing drum is forcibly stirred under the action of the mixing blades. Small capacity mortar mixers are generally mobile, relying on manual feeding and tilting the mixing drum to discharge the material. There are two types of large capacity mortar mixers: mobile and fixed. Some mortar mixers are also equipped with feeding devices and water tanks. When preparing small amounts of mortar, a vertical shaft mortar mixer can also be used. The mixing drum of this mixer is a horizontally placed cylinder with a rotating vertical shaft in the center. The arm of the vertical shaft is equipped with several sets of mixing blades. With the rotation of the vertical shaft, the mixture in the mixing drum is strongly stirred by the blades, and the mixed mortar is discharged from the discharge door at the bottom of the mixing drum.

　　A concrete mixer is a machine that mixes cement, sand and gravel aggregates, and water to make a concrete mixture. It mainly consists of mixing drum, feeding and unloading mechanism, water supply system, prime mover, transmission mechanism, frame and support device. According to the nature of the work, it can be divided into intermittent (batch) and continuous types; According to the mixing principle, it can be divided into self falling and forced types; According to the installation method, it can be divided into fixed and mobile types; Divided into tipping type and non tipping type according to the discharge method; According to the structure of the mixing drum, it can be divided into pear type, drum type, double cone, disc vertical shaft type, and circular groove horizontal shaft type.

　　6. When the concrete mixing is completed or expected to stop for more than 1 hour, in addition to removing the remaining material, stones and clean water should be poured into the shaking drum, and the machine should be turned on to wash away the mortar stuck to the drum before discharging it completely. There should be no accumulated water inside the barrel to prevent rusting of the barrel and blades. At the same time, the accumulated dust outside the mixing drum should be cleaned to keep the machinery clean and intact.

　　A concrete mixer is a machine that mixes cement, sand and gravel aggregates, and water to make a concrete mixture. It mainly consists of mixing drum, feeding and unloading mechanism, water supply system, prime mover, transmission mechanism, frame and support device. According to the nature of the work, it can be divided into intermittent (batch) and continuous types; According to the mixing principle, it can be divided into self falling and forced types; According to the installation method, it can be divided into fixed and mobile types; Divided into tipping type and non tipping type according to the discharge method; According to the structure of the mixing drum, it can be divided into pear type, drum type, double cone, disc vertical shaft type, and circular groove horizontal shaft type.

AfterSalesService :

• Whole grain mixer