Sichuan fully hydraulic open door mixer, all day grain mixing machine, twin-screw TMR mixer

Description :

　　Full mixed feed mixer:

　　 A high-density electronic weighing system can accurately calculate feed and effectively manage feed warehouses. As a standard configuration of the feed mixer, it can not only display the total weight of feed in the feed mixer, but also measure the feed intake of each animal.

　　 The electronic weighing system has high accuracy, which can accurately weigh feed, especially for some trace components such as nitrogen additives, artificial additives, and syrup, thus producing high-quality feed. To improve weighing accuracy, the feed mixing machine is equipped with an independent disc and four sensors, and the material box is installed on the disc.

　　 In addition, the effect of using TMR feed mixer to produce TMR fully mixed diet: it can increase milk production; Reduce the incidence rate of cow; Increase the dry matter intake of dairy cows; Increase milk intake; Increase feed utilization efficiency and save feed costs; Improve labor productivity.

　　The fixed TMR feed mixer is suitable for various types of pastures, and can cut fibrous roughage such as grass, crop straw, and silage feed and mix them with refined feed, reducing the labor intensity of manual feeding, saving feed costs, and improving labor productivity. The adoption of TMR feed mixer can increase the output of cattle and sheep milk and the growth rate of meat cattle and sheep, increase the intake of dry matter of cattle and sheep, improve the quality of cattle and sheep milk and meat, reduce the incidence rate of cattle and sheep, improve the feed utilization rate, save feed costs, and increase the forage yield.

　　【 Working Principle 】

　　The TMR-5/10/13 fully mixed feed mixer mainly consists of one or two winches, and the spiral winches are divided into left-hand and right-hand. During mixing and cutting, the material is simultaneously rotated and mixed towards the middle position of the mixer from both ends of the box in various directions. Each spiral lead on the auger screw is equipped with a moving blade, which cuts and mixes the fibrous forage and straw passing through it with the fixed teeth on the centerline position of the feed mixer, thereby achieving the feeding effect of crushing and mixing the fully mixed feed evenly

　　[Usage and Maintenance]

　　1. When the equipment is running, no hard foreign objects larger than 5mm should enter the machine, otherwise it should be stopped and eliminated. If any abnormal sounds such as metal collision or friction are found during operation, the machine should be stopped in time for inspection and elimination.

　　2. When mixing solid and liquid, it should be operated first, followed by spraying. After spraying, continue to operate and mix for 3-5 minutes.

　　3. The mixing time for a single batch of materials is generally about 5-8 minutes. The mixing time of special materials needs to be determined through user testing.

　　4. The particle size of the mixed material is 20-1400 mesh; The spray volume can be determined based on the adsorption performance of the material and the production process requirements of the user.

　　5. Regularly replace the lubricating oil of the reducer and bearings during use. The lubrication of the reducer should be carried out according to the requirements of the reducer manual. Composite lithium based grease is used for spindle bearings.

　　6. The shaft end seal adopts packing seal. The sealing material is generally oil immersed asbestos. If a small amount of leakage is found during use, the box cover should be tightened and the clamping bolts should be tightened.

AfterSalesService :

• Whole grain mixer