Guangxi Whole day Grain Feed Blender Crushed Straw Bundle Uniform Blender Traction Blender

Description :

　　2、 Composition of the mixing and stirring integrated machine: single axis double helix mixer: 1 ton, length 2860mm, width 1mm, height 1900mm. Supporting power: 11kw. Mixing uniformity: above 99%. Main shaft speed: 28 revolutions per minute. It can be equipped with a 7.5/11kw hammer crusher, grinding head, and toothed disc crusher as a supporting unit; (0.5t) length 2450mm, width 820mm, height 1850mm, can be matched with a 7.5kw crusher to form a matching unit;

　　Supporting power: 7.5kw Mixing uniformity: above 99%, spindle speed: 28 revolutions per minute (0.25 tons) Length 1830mm Width: 780mm Height: 1600mm Supporting power: 4kw Mixing uniformity: above 99%, spindle speed: 28 revolutions per minute can be matched with 7.5kw crusher to form a matching unit; The mixing time of the single axis double helix mixer is 3 minutes, and liquid can be added. The feeding method is to lift the feeding, and it can be equipped with a bucket elevator or a screw elevator. The thickness of the iron plate is 3-12mm, and the stirring method is spiral stirring, or liquid stirring can be added. Suitable for large and small feed mills, as well as large livestock farmers. 3、 Precautions during the use of the hybrid unit: 1. Fix the unit and ensure that the unit base is placed horizontally during installation (if it is uneven, a wooden board can be used to level it), otherwise it may cause vibration of the unit and damage to the body. 2. Check whether the connecting parts and bolts are loose, and whether the crusher rotor is flexible; 3. The power switch and wires should be insulated for easy control. Do not use fuses or fuses that do not meet the rated current of the motor matched with the unit. Motors above 4.5kw must be equipped with overload protection devices. Before the unit starts running, let it idle for 1-2 minutes before any materials are fed in, and check if the machine is running as a whole; 5. Check the tension of the belt to ensure it is appropriate; 6. Check whether there is any leakage at the connection parts of the feeding pipe and mixer; 7. Configure a feed bin for one batch, weigh the required material weight for mixed feed, and start the mixer motor first when starting the machine to make the mixer run first, then start the crusher motor (otherwise the impeller will get stuck and the motor will be burned out). After all the main and auxiliary materials are processed, continue stirring for 5-10 minutes to complete one cycle

AfterSalesService :

• Crushed bale mixer