Henan pasture silage reclaimer scraper self-propelled grass harvester 7-meter lifting silage reclaimer

Description :

　　Supporting motor: 2.2-4.0 kW Applicable voltage: 220V/380V. Main spindle speed: 2800 revolutions per minute Machine net weight: 75kg Machine volume: 75x110x120 (cm) Machine output: grass cutting 600-800kg Crushed corn 450-550kg Packing list Host 1 Screen 3 Belt 2 Structure and working principle 1. This machine is mainly composed of upper body, lower body, rotor assembly, screen, feeding device, frame and other parts. The body and rotor assembly together form the crushing chamber, and the rotor assembly is the main working component. The crushing of materials and the cutting of grass are mainly completed in the crushing chamber. 2. The processed material enters the crushing chamber and is shattered by the high-speed rotating working parts. After repeated grinding and kneading, the crushed material is discharged through the discharge port through the sieve under the action of centrifugal force. When using powder feed, different aperture screens can be replaced according to the thickness of the feed. When cutting grass separately, the screen can be removed. When installing and debugging the machine, it should be placed on a flat and solid ground according to the requirements. Before installing the motor and belt according to the regulations, the rotation direction of the traction power should be checked to ensure that it is consistent with the cutting direction of the grass cutter. After confirming that it is correct, the installation belt should be adjusted and the belt tension should be appropriate. Before starting, check and adjust the clearance between the moving and fixed blades of the grass cutter, ensuring that the clearance adjustment is controlled below 0.8 millimeters without collision, and then tighten the bolts. After the adjustment of each part is normal and confirmed to be correct, turn on the power for trial operation, check whether the fasteners of each part are loose, and whether there are any abnormal sounds in the rotating parts. Safe operation and maintenance: 1. Before starting up, it is necessary to read the user manual carefully and adjust and maintain it according to its regulations. It is important to understand the structure and functional requirements of the machine. 2. The supporting power must meet the requirements and it is not allowed to increase the spindle speed without authorization. 3. Before starting up, check if the operating direction is the same as the cutting direction, otherwise it is strictly prohibited to start up. 4. Hard objects such as metal and stones must not be mixed into the materials that need to be cut, otherwise it may cause damage to the machine. 5. After a few hours of machine operation, it is necessary to observe whether each component is loose. After using for a period of time, the bearings must be filled with grease. 6. When feeding materials, operators are strictly prohibited from getting their hands near the blades to avoid personal injury accidents. Feeding should be uniform and appropriate, not too much or too little, sometimes fast and sometimes slow. 7. It is strictly prohibited to work under the influence of alcohol, illness, or excessive fatigue, and it is strictly prohibited to wear gloves or engage in mental retardation.

　　1. Delingha Automatic Grass Cutting Machine Liaoyuan Silage Feeding Machine Liaoyuan

　　Popular searches:

　　520 Type Functional Grass Grinder 50A Thickened Steel Plate Wet and Dry dual-use Grass Cutting Machine 9FQ-40B Grass Cutting, Grinding, Beating and Rubbing Integrated Machine 580 Type Multi functional Grass Cutting and Feed Grinder 520 Type Functional Grass Grinder 500 High Spray Rubbing Grass Grinder 9FZ-500/300 Type

　　【 Hebei Huicai Technology Development Co., Ltd. 】 Development Potential Brand Enterprise ★★ 7-Year No After sales Record ★★ After sales Service for You ★★ Hebei Bestselling Industrial Product Brand ★★ Bestselling Brand ★★ Please call me and tell me the product order number

　　2. Delingha automatic grass cutting machine Liaoyuan silage feed reclaimer Liaoyuan multiple models pictures

　　Model: RL0 * * * Multi functional Grass Cutting Feed Grinder Model: RL0 * * * Functional Grass Grinder Model: RL0 * * * High spray Grass Kneading Grinder 9FZ-500/300

　　Delingha automatic grass cutting machine Liaoyuan silage feed reclaimer Liaoyuan has a total of ★★ 30 ★★ multiple models. Only 1-3 models are displayed above. If there is no suitable product for you, please consult Hebei Huicai Technology Development Co., Ltd

　　3. Delingha Automatic Grass Cutting Machine Liaoyuan Silage Feeding Machine Liaoyuan Multiple Models Content

　　Model: RL0 * * * Multi functional Grass Cutting Feed Grinder

　　（1） The range of grass cutting and crushing is wide, including crops such as corn, soybeans, wheat, and crop straw, corn straw, green grass cotton straw, rice husk, peanut shells, sweet potato seedlings, grain straw, wheat straw, etc. （2） Product advantages include low power, high output, simple structure, easy operation, one person can operate, wide processing range, raw materials are not limited by length, and the crushing size is adjusted according to the sieve.

　　（3） Widely applicable, it is used for crushing and processing crop straw, as well as for breeding products such as chickens, ducks, cows, and sheep.

　　（4） Technology: The straw crusher researched by our factory is a specialized crusher for straw, which mainly focuses on high output, low energy consumption, and low cost. At present, the crushers used in rural areas generally do not meet the technical requirements for crushing straw, and the efficiency of crushing is low. If the cost of crushing straw is too low, it will be too high and not worth the loss. The straw crusher researched by our factory has solved a long-standing problem for the vast rural areas.

　　Column page://***

　　Grass kneading machine

　　Source URL://***

　　580 type multifunctional grass cutting feed grinder

　　Model: RL0 * * * Type Functional Forage Grinder

　　1、 Product Introduction: The 520 type functional forage grinder is equipped with a flywheel. When the spindle speed reaches 1500 revolutions per minute, the flywheel can store enough energy to assist smaller power sources (such as a single-phase 3 kW electric motor) in completing normal grass cutting and crushing work. 2、 Purpose and Characteristics: This series of forage crushers can process various types of forage such as orange stalks, cotton stalks, bean oranges, wheat oranges, and grass, as well as various grains. It can also crush corn cobs for friends who grow practical fungi such as shiitake mushrooms. This series of forage crushers has the characteristics of cutting grass, kneading grass, and crushing. The new high spray 400 can throw the material 2-5 meters away during grass cutting, improving the previous model's frequent unloading disadvantage. It is an ideal equipment for large, medium, and small farms and households to feed poultry such as chickens, ducks, pigs, cows, and sheep This machine has low power, high output, simple structure, easy operation, can be operated by one person, wide processing range, and raw materials are not limited by length. 3、 Technical parameters

　　Machine model: 520 type Winder angle plate: 5/Upper teeth: 2/Discharge bell plate: 16/65 # manganese * * plate: 3/Voltage: 220V/380V Motor speed: 2800 rpm Rotor speed: 2800r/min Machine output: 500-700kg/h (specific output depends on the size of the sieve) 4. Structure and working principle 1. The machine consists of an upper shell, a lower shell, a discharge port, a feeding hopper, an angle steel frame, hammer plates, cutting tools, etc. 2. When crushing, the thickness of the crushed material is controlled by the size of the sieve holes, and different sieves can be replaced. 3. When cutting grass alone, the sieve can be removed. 5、 Installation and commissioning: 1. The machine should be installed on a flat and sturdy site during operation. 2. Equip and install the motor as required by regulations. 3. Before installing the belt, it is necessary to check whether the rotation direction of the indexing power is consistent with the cutting direction of the grass cutter. After confirming that it is correct, adjust the installation belt and ensure that the belt tension is appropriate. 4. Before starting, check and adjust the clearance between the moving and fixed blades of the grass cutting machine, so that the clearance adjustment is controlled below 0.8 millimeters without collision, and then tighten the bolts. 5. After confirming that all parts are adjusted normally and there are no errors, connect the power supply for trial operation, check whether the fasteners of each part are loose, and whether there are any abnormal sounds in the rotating parts. 6、 Safe operation and maintenance: 1. Before starting up, it is necessary to read the user manual carefully and adjust and maintain it according to its fixed position. It is necessary to master the structure and functional requirements of the machine. 2. The supporting power must meet the requirements and it is not allowed to increase the spindle speed without authorization. 3. Before starting up, check if the operating direction is the same as the cutting direction, otherwise it is strictly prohibited to start up. 4. Hard objects such as metal and stones must not be mixed into the materials that need to be cut, otherwise it may cause damage to the machine. 5. After the machine has been running for a few hours, it is necessary to observe whether each component is loose and regularly add grease to the bearings. 6. When feeding the material, the operator's hands must not be close to the blade to avoid personal injury accidents. The feeding should be uniform and appropriate, not too much or too little, sometimes fast and sometimes slow. 7. It is strictly prohibited to work under the influence of alcohol, illness, or excessive fatigue. It is also strictly prohibited for individuals with gloves, intellectual disabilities, minors under 18 years old, elderly people over 60 years old, and those who have not mastered the rules for using the grass cutting machine to operate it alone. 8. In the workplace, if grass blockage or other faults are found, the power should be immediately turned off and the fault should be eliminated before starting the operation. It is strictly prohibited to operate the machine with defects. 9. Non staff members who are not familiar with the performance of the local mechanism are not allowed to turn on the machine casually. 10. When the machine is not in use for a long time, it should be stored indoors or in a shed to prevent rusting. Note: The grinding fineness of this machine is determined by the size of the sieve aperture. Users can choose the appropriate sieve according to the particle size requirements of the feed.

　　Column page://***

　　Grass kneading machine

　　Source URL://***

　　520 type functional forage grinder

　　Model: RL0 * * * High spray grass kneading grinder 9FZ-500/300

　　Machine technical parameters

　　Machine model: 9FZ-500/300. Supporting motor: 2.2-4.0 kW Applicable voltage: 220V/380V. Main spindle speed: 2800 revolutions per minute Machine net weight: 75kg Machine volume: 75x110x120 (cm) Machine output: grass cutting 600-800kg Crushed corn 450-550kg Packing list Host 1 Screen 3 Belt 2 Structure and working principle 1. This machine is mainly composed of upper body, lower body, rotor assembly, screen, feeding device, frame and other parts. The body and rotor assembly together form the crushing chamber, and the rotor assembly is the main working component. The crushing of materials and the cutting of grass are mainly completed in the crushing chamber. 2. The processed material enters the crushing chamber and is shattered by the high-speed rotating working parts. After repeated grinding and kneading, the crushed material is discharged through the discharge port through the sieve under the action of centrifugal force. When using powder feed, different aperture screens can be replaced according to the thickness of the feed. When cutting grass separately, the screen can be removed. When installing and debugging the machine, it should be placed on a flat and solid ground according to the requirements. Before installing the motor and belt according to the regulations, the rotation direction of the traction power should be checked to ensure that it is consistent with the cutting direction of the grass cutter. After confirming that it is correct, the installation belt should be adjusted and the belt tension should be appropriate. Before starting, check and adjust the clearance between the moving and fixed blades of the grass cutter, ensuring that the clearance adjustment is controlled below 0.8 millimeters without collision, and then tighten the bolts. After the adjustment of each part is normal and confirmed to be correct, turn on the power for trial operation, check whether the fasteners of each part are loose, and whether there are any abnormal sounds in the rotating parts.

　　Safe operation and maintenance: 1. Before starting up, it is necessary to read the user manual carefully and adjust and maintain it according to its regulations. It is important to understand the structure and functional requirements of the machine.

　　2. The supporting power must meet the requirements and it is not allowed to increase the spindle speed without authorization.

　　3. Before starting up, check if the operating direction is the same as the cutting direction, otherwise it is strictly prohibited to start up.

　　4. Hard objects such as metal and stones must not be mixed into the materials that need to be cut, otherwise it may cause damage to the machine.

　　5. After a few hours of machine operation, it is necessary to observe whether each component is loose. After using for a period of time, the bearings must be filled with grease.

　　6. When feeding materials, operators are strictly prohibited from getting their hands near the blades to avoid personal injury accidents. Feeding should be uniform and appropriate, not too much or too little, sometimes fast and sometimes slow.

　　7. It is strictly prohibited to work under the influence of alcohol, illness, or excessive fatigue, and it is strictly prohibited to wear gloves or have intellectual disabilities

AfterSalesService :

• Self propelled silage reclaimer
• chain type grass reclaimer
• aquaculture reclaimer