Overhead Insulated Line 35kV National Standard 35KV Overhead Insulated Line JKLGYJ-35kv-50/8
Category:
Electrical Engineering/Wire and cable/Insulated wire
Model:
JKLGYJ-35kv-50/8
Brand:
Zheng Fan
Retail Price
8.26USD
重量
kg
- Product Description
-
Description :
The 35KV specification parameters of insulated overhead conductors are mainly used in urban streets and green areas, overhead lines near buildings, and rural areas with increasing requirements for power supply safety and operation management, especially suitable for use in densely populated cities, towns, and green belts; It has good mechanical performance, safety performance, and aging performance.
Product Production Execution Standards:
GB/T1257-2008 "Overhead Insulated Cables with Rated Voltage of 1KV and Below"
GB/T14049-2008 "Overhead Insulated Cables with Rated Voltage of 10KV and 35KV"
Insulated overhead wire 35KV specification parameters Product performance:
Conductor: The conductor is a tightly compressed circular stranded conductor.
Conductor shielding insulation material: The conductor shielding material is made of semi conductive shielding material, which is uniformly extruded on the conductor, with a smooth surface, no obvious twisted wire protrusions, sharp corners, particle burning or scratches, etc; The insulation adopts cross-linked polyethylene or polyethylene overhead insulation material, which is evenly extruded on the conductor shielding layer. The insulation surface should be flat, with uniform color and no scratches.
The insulation of the product must pass the GB/T3048.5 product withstand voltage test inspection.
Product Features:
The temperature for cable laying should not be lower than 0 ℃
The duration of a short circuit should not exceed 5 seconds; the maximum temperature of the cable should be high; Polyethylene insulation at 160 ℃, cross-linked polyethylene insulation at 250 ℃
The long-term allowable working temperature for cable conductors should not exceed 70 ℃ for polyethylene insulation and 90 ℃ for cross-linked polyethylene insulation
The representation method of overhead insulated cables:
JK -------- Overhead
T --------- Copper core (generally omitted)
L - Aluminum core
LH aluminum alloy core
YJ - Cross linked polyethylene insulation
Y---------- Polyethylene insulation
AfterSalesService :
Key words:- 35kV overhead insulated line
More Products
