JLB40A-80 Aluminum Clad Steel Wire Manufacturer for Guangxi Electric Power

Description :

　　JLB40A-80 factory price direct sales

　　Mainly used as overhead ground wire to prevent lightning.

　　Purpose: Mainly used as an overhead ground wire to prevent lightning. Characteristics: Due to the development of production technology for aluminum clad steel wire, aluminum clad steel wire has superior performance. Its characteristics are as follows: (1) The size and performance of aluminum clad steel wire can be adjusted within a large range (product size range of 1.2 mm to 0.10 mm, product strength range of 50MPa to 1400 MPa), the adjustment range of the ratio of aluminum layer to wire cross-sectional area can reach 13% to 85%, and the conductivity range is 14% to 55% IACS.

　　(2) The aluminum layer on the surface provides excellent corrosion resistance.

　　(3) The bonding strength between aluminum and steel is good. ­

　　(4) The density is lower than that of galvanized steel strands and aluminum coated steel strands.

　　(5) When used as a power transmission line, it has excellent heat resistance.

　　(6) The cross-section of the wire can be made into complex shapes.

　　JLB40A-80 can be used not only for various cables, but also for manufacturing various anti shy products; Guardrails

　　Protective net, connecting strip, protective wire, etc.

　　Because there are many output directions for high-voltage circuits, but the number of lines is still limited, technicians have designed high-voltage electrical racks to concentrate the lines on this rack and output the specified direction according to regulations. This will increase the number of lines and ensure safer power output work. In addition, it can also be managed more centrally. An important material used in high-voltage electrical racks is aluminum clad steel stranded wire. This type of wire is mainly composed of two metal materials, one is steel and the other is aluminum. Based on steel, a main core is made inside, and then the aluminum wire is wrapped around the outside according to certain rules. The role of the steel core is to increase the overall strength and hardness, ensuring that the aluminum clad steel stranded wire can be used in high-pressure environments. Aluminum wire has good conductivity and can ensure the rapid propagation of current.

　　Aluminum clad steel stranded wire is a bimetallic wire that continuously and uniformly wraps aluminum on a steel core. It has the advantages of good conductivity, corrosion resistance, high frequency transmission performance, and high strength of steel. Aluminum clad steel stranded wire is a stranded wire that uses aluminum clad steel wire as a reinforcing core and aluminum wire twisted together. Compared with ordinary steel core aluminum stranded wire, the conductor weight is lighter, the current carrying capacity is increased, the power loss is reduced, the service life is long, and there is no increase in installation cost. Mainly used for reinforcing prestressed concrete structures, such as large-span railways and bridges, crane beams, geotechnical anchoring engineering, multi story industrial plants, etc.

　　Aluminum clad steel stranded wire can be used as a ground wire, which has the advantage of effectively sharing the single-phase short-circuit current of the OPGW installed together with it. At the same time, it also has many advantages on ultra-high voltage lines, such as reducing power frequency voltage, minimizing secondary supply current, and reducing interference and dangerous effects on communication lines. In addition, it has anti-corrosion properties compared to conventional galvanized steel strands, making it particularly suitable for coastal areas and areas with severe industrial pollution and corrosion.

AfterSalesService :

• Guangxi Electric Power Aluminum Clad Steel Wire Manufacturer