JL/G1A630/55 specification LGJ steel core aluminum stranded wire technical parameters for extended conductor

Description :

　　 JL/G1A630/55 specification LGJ steel core aluminum stranded wire technical parameters

　　Introduction to the characteristics of steel cored aluminum stranded wire:

　　 Steel core aluminum stranded wire, steel core has high mechanical strength, aluminum has high conductivity (low resistance coefficient), and a small specific gravity. Steel cored aluminum stranded wire combines these advantages and is suitable for high-power, high-voltage, long-distance power transmission; However, steel strands only have high mechanical strength and are not suitable for power transmission.

　　 Steel cored aluminum stranded wire is a combination of hard round aluminum wire and galvanized steel wire (or aluminum zinc coated steel wire) twisted together. Steel cored aluminum stranded wire has the characteristics of simple structure, low line cost, easy installation and maintenance, large transmission capacity, and is suitable for laying in special geographical conditions such as crossing rivers and valleys. It is suitable for overhead transmission and distribution lines of various voltage levels.

　　Anti corrosion steel core aluminum stranded wire is coated with anti-corrosion coating on different structural layers of steel core aluminum stranded wire. Anti corrosion steel core aluminum stranded wire is mainly used in coastal and chemical areas with severe corrosive atmosphere to the wire. Can improve the service life of wires.

　　 Product Model:JL/G1A、JL/G1B、JL/G2A、JL/G2B、JL/G3A

　　Among them, G1A or G1B refers to ordinary strength steel wire.

　　G2A or G2B refers to high-strength steel wire.

　　G3A refers to ultra-high strength steel wire.

　　Model difference: Taking JL/G1A-240/30 steel core aluminum stranded wire as an example.

　　In the national standard (GB/T1179-2008), it is represented by the current JL/G1A-630/55;

　　In the national standard (GB/T1179-1983), it is represented by LGJ-630/55.

　　definition

　　Steel cored aluminum stranded wire is made by twisting aluminum wire and steel wire, and is suitable for overhead transmission lines.

　　Main applications of steel cored aluminum stranded wire

　　 For high-voltage transmission lines, due to the limited path of the line and the impossibility of installing multiple lines on one path, people have come up with the method of using one path, one set of iron towers, and hanging multiple wires, that is, one line is equivalent to installing multiple lines; For 500KV transmission lines, China mostly adopts the method of hanging four wires, which is called the same tower parallel installation.

　　Advantages of steel cored aluminum stranded wire

　　 Steel cored aluminum stranded wire has the characteristics of simple structure, easy installation and maintenance, low line cost, large transmission capacity, and is conducive to laying in special geographical conditions such as crossing rivers and valleys. It has good conductivity and sufficient mechanical strength, high tensile strength, and the tower distance can be enlarged. Therefore, it is widely used in overhead transmission and distribution lines of various voltage levels.

　　 Specification of steel cored aluminum stranded wire: 10/2~1440/100, in accordance with standard GB/T1179-2017.

　　 JL/G1A630/55 specification LGJ steel core aluminum stranded wire technical parameters

　　Transportation and packaging of steel cored aluminum stranded wire:

　　Steel cored aluminum stranded wire should be delivered in reels, with the distance between the outermost layer and the edge of the cable reel side panel not less than 30mm, and properly packaged. The two twisted wires connected together during packaging should have at least half of the aluminum wire cut at the connection point, and the two sides of the connection point should be firmly tied. The cable reel shall comply with the provisions of GB4005-83 "Delivery reels for wires and cables". Short stranded wires are allowed to be delivered in loops, and each loop should be tied at least three times and properly packaged. The product should be inspected and qualified by the manufacturer before leaving the factory, and each product leaving the factory should be accompanied by a quality inspection certificate.

　　Steel cored aluminum stranded wires are arranged in a criss crossing manner on transportation vehicles such as vehicles and ships. The cable reels must be placed steadily, and both sides must be firmly fixed to the transportation vehicle with steel wire ropes. The bottom of the cable reels should be plugged with triangular wedges to prevent them from shaking, colliding, or tipping over during transportation. When transporting large cable reels, attention should be paid to selecting road transportation equipment. If using heavy-duty trucks for transportation, the height of the truck should comply with the height restrictions of bridges, culverts, etc. on the traffic road. If the limit is exceeded, a dedicated trailer can be used to reduce the transportation height. When the cable reel rolls on the ground, it must be rolled in the direction indicated by the arrow on the side of the cable reel. Rolling in the opposite direction will cause the cable to unwind and loosen. For cables without protective plates, the two side plates must protrude more than 10cm from the outer layer of the cable when rolling. During rolling, hard objects should be prevented from pressing under the cable reel to avoid damaging the cable. When rolling the cable reel, it should be controlled within a small distance range, and special equipment such as forklifts or cranes should be used for long-distance movement.

AfterSalesService :

• aluminum conductor steel reinforced (ACSR)