Fuel powered trolley furnace, price of fuel powered trolley furnace

Description :

　　The car adopts anti-collision sealing bricks, and the furnace door adopts a handwheel and spring type automatic compression mechanism. The automatic sealing trolley and furnace door are integrated with rails, without the need for foundation installation, and can be used on a horizontal ground. Mainly used for shell roasting, high chromium, high manganese steel castings, ductile iron, rolling mills, steel balls, 45 steel, stainless steel and other quenching, annealing, aging, as well as heat treatment of various mechanical parts.

　　1. The furnace body skeleton is composed of various large and medium-sized steel sections welded on site, and the outer shell sealing plate is made of color steel plate, which is overall beautiful and sturdy.

　　2. The furnace lining adopts a full fiber structure, which saves about 60% energy compared to brick furnaces. High quality long fiber felt is used as raw material, and specialized equipment is used to make modules. A certain amount of compression is left during the processing to ensure that each ceramic fiber block expands in different directions after masonry is completed, so that the modules are squeezed into a seamless whole, achieving a good heat storage effect. Moreover, this product is easy and fast to construct, and can be directly fixed to the stainless steel anchor round nails of the furnace shell steel plate. Compared with other products, the advantages are low thermal conductivity, low heat capacity, excellent corrosion resistance, excellent thermal stability, thermal shock resistance, insulation, and the anchor is set on the cold surface of the furnace body, which improves the high temperature resistance strength of the fiber.

　　3. The trolley frame is composed of various large I-beams, channel steels, angle steels, and thick steel plates welded together. The trolley transmission adopts a combination of electric motor and worm gear reducer to drive the front active wheel transmission through a chain. The refractory masonry of the trolley adopts high alumina shaped brick structure, which has good sealing effect with the furnace body and high compressive strength. The sealing between the trolley and the furnace body adopts a soft contact method, and a labyrinth type sand sealing groove and sand sealing knife sealing device are installed at the lower part of the trolley.

　　4. The furnace door adopts a side opening design, which is simple and convenient, and the sealing adopts a handwheel compression mechanism.

　　5. Combustion system: Install several RK-50 burners on both sides of the oil furnace, and the heat flow circulates back and forth in the furnace to ensure uniform furnace temperature.

　　6. Smoke exhaust preheating device: A smoke exhaust preheating device is installed at the upper end behind the furnace. When the flue gas in the furnace passes through the preheater, cold air is sent by the fan for preheating, and then sent to the burner for combustion assistance through the pipeline. A manual disc valve is installed at the outlet, which can adjust the pressure inside the furnace.

　　7. The control system adopts simple and practical chain control, with digital display of temperature and contactor control.

　　The specific model price needs to be discussed in person by phone!

AfterSalesService :

• Fuel powered trolley furnace