Integrated above ground box pump Nanchang above ground fire box pump box pump integrated equipment manufacturer sales

Description :

Integrated ground tank pumpThe inlet pipe of the equipment is directly connected to the tap water pipe network. Water is pressurized into the inlet pipe of the equipment under the residual pressure of the tap water pipe network. The booster pump of the equipment continues to pressurize on the basis of the residual pressure of the inlet water, and then increases the water supply pressure to the pressure required by the user before supplying water to the outlet pipe network; When the user's water consumption is greater than the water supply of the tap water network, the pressure of the inlet pipe network decreases. When the pressure at the inlet of the equipment drops to less than 0 (or the set protection pressure of the pipe network), the negative pressure prevention and control device in the equipment automatically starts working, adjusting the operating status of the equipment until it stops and is on standby, ensuring that the pressure of the inlet pipe network no longer decreases and does not have adverse effects on the tap water network; When the water supply capacity of the tap water network is restored and the pressure of the inlet network is above the protection pressure, the equipment will automatically start and resume normal water supply; When the remaining pressure in the water supply network meets the user's water supply requirements, the equipment automatically enters a sleep state and is supplied directly to the user by the water supply network. When the water supply is insufficient, the equipment automatically resumes operation; When the user does not use water or uses very little water, the equipment automatically enters a shutdown sleep state. The small flow stabilizing and pressure maintaining tank located on the outlet side of the equipment maintains the user's water usage and pipe network leakage. When the user's water stabilizing and pressure maintaining tank cannot maintain the required pressure of the water supply pipe network, the equipment automatically wakes up and resumes normal operation. During the operation of the equipment, the remaining pressure of the tap water pipeline network is fully utilized, which not only does not have adverse effects on the tap water pipeline network, but also maximizes the satisfaction of user needs, reduces water supply energy consumption, and achieves optimal operation of the water supply system.

　　Box pump integration, also known as intelligent box pump station, is actually what we usually refer to as box type non negative pressure water supply equipment. Box pump integration can be directly connected in series with the municipal pipeline network, and can provide stacked water supply based on the pressure of the original municipal pipeline network. The difference can be compensated as much as possible. This makes the equipment selection smaller and maximizes the savings in the later integrated operation cost of the box pump. The box pump integration adopts a fully enclosed operation mode, without the need to build a water tank, which can save a large amount of civil engineering investment and effectively solve the secondary pollution phenomenon of traditional water supply methods.

AfterSalesService :

• Integrated ground tank pump