Stainless steel water tank combination stainless steel insulated water tank stainless steel civil air defense water tank

Description :

Stainless steel combination water tankManufacturing: 1. Stainless steel welding rods are used, all of which are tungsten inert gas shielded welding processes;

　　2. Before welding, a groove should be made according to the regulations, and the dimensions formed outside the weld seam should comply with the regulations, and it should be ensured that there is no virtual welding or slag inclusion;

　　3. Smooth surface, no cracks, no bubbles in the weld seam, symmetrical arrangement of the lining structure, and no burrs;

　　4. At the end of the installation of the water tank, the inside and outside should be cleaned and decontaminated.

　　5. After the production and installation are completed, conduct a full water test to check for any water leakage. If there is any leakage, immediately modify it and make it aesthetically pleasing.

Stainless steel combination water tankWhat is the principle behind designing the board into a convex shape?

　　1. Improve the impact resistance of the water tank wall and the load-bearing capacity of the boundary layer of small water tanks. Everyone knows that stainless steel insulated water tanks are made of metal plates. If the wall of the water tank is not drum shaped, the boundary layer of the small water tank will be drum shaped due to water pressure, so everyone only needs to design it as drum shaped. It is the application of structural mechanics by designers. The use of metal plates can withstand greater pressure, thereby saving and controlling costs.

　　2. The reason for the overall increase in volume of the stainless steel water tank design is that the external drum can greatly enhance the volume of the stainless steel water tank, and the joint legs in the stainless steel water tank occupy a very large part of the volume.

　　3. Improve the welding characteristics of electric welding. If convex suspension is not used, then convex design is not used. During the assembly process, welded plates are difficult to avoid being affected by high-temperature deformation. The use of this design can reasonably disperse the strain judgment during the welding process and maintain the initial shape.

　　4. If hot water is stored at a higher temperature, it can reduce the impact of thermal expansion.

AfterSalesService :

• stainless steel water tank