Introduction to the advantages of the integrated product of buried assembled box pumps in underground fire pump stations
Category:
Environmental Protection/Sewage treatment equipment/Buried sewage treatment equipment
Model:
JZFBZ-700-150-50-1
Brand:
Yancheng Jinze Water Supply Equipment Co., Ltd
model:
JZFBZ-700-150-50-1
purpose:
Fire water supply
Processing & Customization:
yes
Wastewater treatment capacity:
one hundred and fifty
category:
Underground fire pump station
Decontamination rate:
ninety-nine
pump power:
eighteen
Overall dimensions:
700x150x50
Flow meter specifications:
one hundred and fifty
Diameter of water outlet pipe:
four hundred
Inlet pipe diameter:
seven hundred
Specifications:
7X1.5X0.5m
Is it a cross-border source of goods:
No
manufacturer:
Yancheng Jinze
Retail Price
28,000.00USD
重量
kg
- Product Description
-
model JZFBZ-700-150-50-1
purpose Fire water supply
Processing & Customization yes
Wastewater treatment capacity one hundred and fifty
category Underground fire pump station
Decontamination rate ninety-nine
pump power eighteen
Overall dimensions 700x150x50
Flow meter specifications one hundred and fifty
Diameter of water outlet pipe four hundred
Inlet pipe diameter seven hundred
Specifications 7X1.5X0.5m
Is it a cross-border source of goods No
manufacturer Yancheng Jinze
Description :
Underground fire pump stationPrefabricated box pump integration 1. New materials, technologies, and processes for the development of high-tech products for integrated fire pump stations using buried box pumps. It integrates a water tank and a pump room, with a novel concept and reasonable design, and has been used by thousands of users across the country.
2. The integrated fire pump station with buried box pump has a short construction period and long service life: corresponding water tanks and water pumps can be configured according to project requirements, and the water tank capacity and water pump model are configured based on the owner's calculation results.
3. The integrated fire pump station with buried box pump requires less materials and saves consumables. In order to achieve strength, we will cause deformation of the material. The stainless steel water tank produced by using this process has a particularly smooth and three-dimensional appearance.
4. The integrated fire pump station with buried box pump is easy to maintain and operates stably and reliably. It is a substitute product for underground concrete water tanks. Low cost, does not occupy ground area, can be placed in the owner's open space, under the green belt, or in scattered open spaces. Made with anti-corrosion grade, durable and long-lasting.
5. The underground tank pump integrated fire pump station is assembled according to the atlas and technical requirements, and is assembled with Φ 1030 hot-dip galvanized screws and environmental water resistant and anti-aging adhesive strips. After the water tank is assembled and formed, the tie bars and top columns are installed. The reinforcement is made of hot-dip galvanized steel with a diameter of 48, and is installed horizontally and vertically at a distance of 1 meter. The top pillar is sealed with 4 hot-dip galvanized pipes of diameter 48 evenly distributed per square meter.
6. The integrated fire pump station with buried box pump is installed according to the pump station, and the screws on the surface of the pump room are checked and accepted after installation to ensure that all fasteners are tightened without omission.

When the concrete fire water tank is built on both sides of the wall, the waterproof and anti-corrosion level of the main wall needs to be increased. When building the pool, steel pipes should be installed in advance, and the difficulty of opening the water level gauge and fixing it is difficult; The integrated non floating pump station with box and pump can have holes around the water tank wall when assembled indoors, with good ventilation and convenient management. Its service life is as follows: the cost-effectiveness of the concrete fire water tank is not high, and it can be idle for a long time. If it cannot operate normally, it can easily cause the pump to rust or leak water and humidity, resulting in motor burnout; The integrated non floating pump station of the box pump has automatic inspection function, with regular low-frequency automatic inspection. The water pump is a dry-type motor, which has the characteristics of long service life and environmental protection. Equipment integrity: The concrete fire water pool and basement pump room must be equipped with a water accumulation pit, outdoor sewage pump and related equipment (an additional water accumulation pit is required for the outdoor pool), and all accessories in the buried integrated fire pump station are complete, with a built-in water accumulation tank. There is no need to separately equip additional equipment such as water accumulation pits, which saves both space and money.
The integrated non floating pump station of the box pump is made of stainless steel sheet molded for the water contact part. High structural strength. The reinforced part is formed by pressing galvanized steel plate. The combination size is arbitrary. The sealing adopts the developed standardized product - sealing tape, which has the advantages of water resistance, oxidation resistance, and good sealing performance. The service life is over 50 years.


AfterSalesService :
Key words:- Underground fire pump station
More Products