Prefabricated pump station integrated prefabricated pump station fiberglass winding process operates independently

Description :

Prefabricated pump stationComposition: A fiberglass cylinder with a water inlet on the cylinder wall. The water inlet is equipped with a debris grid (divided into manual basket grid and crushing grid), which effectively isolates debris from entering the cylinder and causing blockage. The basket grid is manually lifted up and cleaned through the track when the debris is full. The crushing grid comes with a built-in crushing motor to crush debris without manual cleaning. Rainwater or sewage flows into the cylinder through the inlet, and two submersible sewage pumps are installed at the bottom (the number of pumps can be determined according to the situation). When the water level reaches a certain height, the sensor automatically senses the pump level to start the pump. After starting the pump, it is lifted up through a stainless steel pipeline to the outlet and discharged into the downstream urban sewage pipe network for discharge. At the same time, there will be an operating platform under the cylinder cover. When the pump needs maintenance and repair in the later stage, people can lift the pump up with iron chains through guide rails on the platform for maintenance.

　　The integrated prefabricated pump station replaces the concrete water tank, and its obvious advantage is high integration. One fiberglass cylinder can carry all the functions of the pump station. In the past, a spare room had to be built next to the old-fashioned concrete water tank, which occupied a large land area, was labor-intensive and time-consuming, and also affected the surrounding environment. The operation process of the integrated prefabricated pump station: The sewage in the sewage pipeline enters the cylinder through the inlet of the pump station and is temporarily stored in the cylinder. When the water level in the cylinder reaches a certain height, the liquid level sensor will transmit a signal to the control cabinet to start the pump for drainage. The submersible sewage pump is placed at the bottom of the cylinder, and the outlet of the pump is connected to the outlet of the pump station by a stainless steel pressure pipeline. The submersible sewage pump transmits the sewage to the outlet of the pump station through the pressure pipeline and discharges it into the municipal pipeline network. When the water level drops to the stop pump level, the submersible sewage pump stops running.

　　Characteristics of integrated prefabricated pump station: 1. Small size, but excellent effective capacity can be utilized; 2. The cylinder is made of advanced corrosion-resistant materials such as reinforced fiberglass mechanical winding; 3. The pump pit adopts fluid design, with good flow state, no blockage, and self-cleaning function; 4. Reliable, lightweight, and cost-effective; 5. Equipped with high-performance submersible sewage pumps, which widely use sensors to monitor the operation status of the pumps at all times, greatly reducing costs; 6. High degree of automation integration, enabling remote monitoring and control, as well as unlimited remote data transmission and automatic generation of operational reports; 7. Safe to use, its reasonable design greatly reduces the generation of foul odors and provides protection; 8. Safe buried installation, without affecting the surrounding area and landscape after installation; 9. Short installation cycle, saving most of the costs and saving time and effort; 10. One time investment, low long-term operating costs, significant energy-saving benefits, and can be lifted up for secondary landfill and reuse in case of encountering or being damaged; 11. Completely, pump stations with different diameters and heights of inlet positions can be designed according to different projects, meeting the needs of various locations. Anaerobic biological treatment includes conventional anaerobic methods (such as composting), anaerobic biofilters, anaerobic methods, anaerobic bed sulfurization beds, two-phase anaerobic methods, and UA methods.

AfterSalesService :

• Prefabricated pump station