Stainless steel water tank, stainless steel domestic water tank, combined stainless steel welded water tank

Description :

stainless steel water tankThe splicing of LB304 stainless steel plates on the top, walls, and bottom of the box adopts butt welding (I-type welding for the top plate, V-type welding for the bottom plate and side walls), and other welding is fillet welding. There is no cross crossing phenomenon between the welds, and they must not overlap with the reinforcing ribs. The welding machine is the LB-2-300 stainless steel water tank special welding machine, which has the functions of electric welding and argon welding. After the water tank is made, it should be completely filled with water. After 2-3 hours, use a lead hammer weighing 0.5-1.5 kilograms to lightly tap along the weld seam about 150 millimeters on both sides. If there is no water leakage, it is considered qualified; If any leakage is found, it must be re welded and tested again. Stainless steel water tanks are suitable for large hotels, restaurants, offices, apartments, research and teaching buildings, as well as places with high water quality requirements such as food processing, medical and health care, and electronics industry. Stainless steel water tanks are generally made of SUS304 stainless steel plates, which have stable physical and chemical properties, no pollution to water quality, and ensure clean and hygienic water quality. Stainless steel water tanks are stamped and formed, with high strength, light weight, clean and elegant appearance. The water tank plate is generally made of high nickel 8.0 or above 3042B plate, with a smooth and beautiful surface that is easy to clean; Due to the dense oxide layer on the surface, it has superior corrosion resistance, good sealing performance, high impact resistance, and strong seismic performance.

　　The characteristics and benefits of stainless steel water tanks: 1. Using less material consumption, the strength effect is achieved through material deformation method. The square assembled water tank produced by this process has a smooth line shape, good three-dimensional sense, and can beautify the city.

　　2. This type of water tank is designed according to specification SS177, made of SUS304 material, with strong corrosion resistance, good seismic performance, easy transportation, no need for large lifting equipment, and can be assembled on site for different volumes.

　　3. Cleanliness and hygiene, compared with traditional water tanks, have fewer consumables, higher structural strength, and longer service life, which is a new trend in the water tank industry.

　　4. Multi use of hot and cold can provide an ideal insulation device.

AfterSalesService :

• stainless steel water tank