Integrated sewage pumping station buried sewage lifting device

Description :

Integrated sewage pumping stationCharacteristics of the device

　　1、 Customized on demand. Each pump station is designed based on the parameters provided by the customer.

　　2、 Advanced design utilizing advanced CFD flow field calculations.

　　3、 Industrial control design. Adopting Schneider Electric, touch screen design, including communication interface, and free switching without control mode.

　　4、 The material is novel. The pump station cylinder structure is made of fiberglass reinforced plastic (GRP) with fully automated control for continuous winding.

　　5、 Construction standards. All accessories are designed and manufactured in the factory, including pressure pipelines, maintenance platforms, outlet pipes, etc. Strict debugging is carried out before leaving the factory to ensure the reliability of the pump station. The function of an integrated prefabricated pump station is to collect wastewater below the water level in sewage tanks, as well as wastewater discharged away from municipal sewage networks and sanitary facilities, in areas where gravity cannot be relied upon for self discharge. The integrated prefabricated pump station is used to lift the wastewater and transport it to the sewage network.

　　The integrated sewage pump station aims to meet the requirements of the urban water supply network, which can pump water without generating negative pressure and has a certain regulation and storage capacity, and can continuously stop water supply during peak periods; The integrated prefabricated pump station collects wastewater discharged from sewage pipes and sanitation facilities far away from the municipal sewage network, lifts and pumps it into the urban sewage system.

　　Performance and advantages of integrated sewage lifting device

　　1. The sewage pump station has a "zero sedimentation" pump station bottom design, which reduces the sedimentation of the pump station to an extremely low level and reduces the risk of pump blockage;

　　2. The sedimentation of the pump station is reduced, resulting in a decrease in the production of toxic gases and a reduction in odor pollution and safety accidents;

　　3. The Fangxing brand submersible sewage pumps used in the sewage pumping station are all high-quality submersible cutting pumps that can operate stably in harsh sewage environments. At the same time, all sewage pumps use large channels and impellers with cutting, which have good impurity permeability and reduce the risk of pump blockage;

　　4. The sewage pump station operates automatically based on the liquid level to ensure that the sewage entering the pump station is pumped away as soon as possible, reducing the risk of pump blockage caused by sedimentation of sewage;

　　5. The sewage pump station uses a crushing grid to crush pollutants, which can prevent large volume debris from entering the pump station.

　　6. The entire pump station system has undergone precise calculations to ensure that all hydraulic components operate under the specified operating conditions, greatly reducing the failure rate;

　　7. The outer wall of the sewage pump station is made of fiber wrapped fiberglass, which can withstand pressure, tear, and ensure waterproofing. It ensures the stable operation of the pump station itself and does not affect the surrounding environment; The service life is over 50 years.

　　8. Self coupling installation system, in case of any blockage in the water pump; The integrated prefabricated pump station can quickly improve the characteristics and functions of pump maintenance and inspection. The integrated prefabricated pump station is a new type of environmental protection equipment, which is deeply buried underground without pump station civil engineering and does not occupy land indicators. It is highly favored by industries such as municipal engineering, industrial fields, and construction fields.

AfterSalesService :

• Integrated sewage pumping station