AeroShell Fluid 31 imported original Shell 31 aviation flame retardant hydraulic oil
Category:
mechanical equipment/Industrial lubricants/Hydraulic oil
Model:
AeroShell Fluid 31
Brand:
Shell
Retail Price
590.00USD
重量
kg
- Product Description
-
Description :
Aviation Material Technology, an integrated supplier of aviation lubricants and oils! We will provide you with original imported AeroShell Fluid 31, straight shipping. Welcome to purchase!Introduction to AeroShell Fluid 31 aviation hydraulic oil:
Oil type: aviation hydraulic oil/flame resistant hydraulic oil/synthetic hydraulic oil
Composition: Synthetic hydrocarbon base oil, antioxidant, preservative, defoamer, anti-wear agent
Applicable temperature: -40 ℃~205 ℃
Execution standard: MIL-PRF-83282D/DCSEA 437 A
Application type: Aircraft and hydraulic systems
Manufacturer: Shell Oil Company
Performance characteristics of AeroShell Fluid 31 aviation hydraulic oil:
Shell 31 aviation hydraulic oil complies with MIL-PRF-83282D and DCSEA 437 A standards. Hydraulic oil No. 31 has a high flash point, excellent low-temperature performance, and good oxidation and thermal stability. Has the following characteristics:
Excellent flame retardant performance, suitable for high temperatures up to 205 ℃.
Excellent oxidation stability, high temperature resistance, reduced coking, and the oil is not easily deteriorated.
Excellent corrosion resistance and wear resistance, protecting hydraulic components.
Application examples of AeroShell Fluid 31 aviation hydraulic oil:
Shell 31 aviation hydraulic oil is mainly used in various hydraulic systems of aircraft, including autopilot, shock absorbers, brakes, flight control systems, hydraulic servo control systems, and other systems using synthetic elastomer seals. This oil is mainly used to replace the previous mineral based aviation hydraulic oil.
★ Fighter/Bomber/Transport/Helicopter
★ /
★ Civil aviation aircraft/general aviation aircraft
★ Unit/Research Institution
Storage method of AeroShell Fluid 31 aviation hydraulic oil:
Shell 31 aviation hydraulic oil is compatible with Shell 4, 41, 51, 61, and 71.
◆ Can be used in hydraulic systems related to MIL-PRF-5606, MIL-PRF-6083, MIL-PRF-87257, and MIL-PRF-46170 standards.
◆ Store in a clean, cool, and dry place to prevent moisture, dust, and other corrosive media from entering
Chlorinated solvents should not be used to clean hydraulic components using Shell 31. This type of solvent can corrode hydraulic components.
AeroShell Fluid 31 aviation hydraulic oil parameter list:
AeroShell Fluid 31 Aviation Hydraulic Oil Testing Project
MIL-PRF-83282D Technical Specifications
AeroShell Fluid 31 Aviation Hydraulic Oil Test Results
100 ℃ kinematic viscosity, mm2/s
Not less than 3.45
three point five three
40 ℃ kinematic viscosity, mm2/s
Not less than 14
fourteen point three three
-40 ℃ kinematic viscosity, mm2/s
Not greater than 2200
two thousand and ninety-eight
Open flash point, ℃
Not less than 205
two hundred and thirty-seven
Ignition point, ℃
Not less than 245
two hundred and fifty-one
Acid value, mg/KOH/kg
Not greater than 0.1
zero point zero one
Pour point, ℃
Not greater than -55
-Below 55
Solid particle impurities,%
none
none
Low temperature stability, -40 ℃, 72 hours
must pass
qualified
AfterSalesService :
Key words:- AeroShell Fluid 31
More Products
