Ventilation and ventilation system for hardware factory workshop
Category:
Environmental Protection/Fan exhaust equipment/suction fan
Model:
TH-1380
Brand:
Teng Huang
model:
TH-1380
structural type:
Blade type
air flow:
forty-four thousand and five hundred
rated speed:
four hundred and forty-five
Motor power:
one point one
impeller diameter:
one thousand two hundred and seventy
Fan pressure:
one hundred and twenty
performance:
Low noise fan
purpose:
Ventilation and cooling equipment for factory, workshop, and warehouse
shaft power:
1.1KW
Number of blades:
six
Turbine head material:
stainless steel
noise:
sixty-eight
material:
galvanized steel sheet
airflow direction:
negative pressure
Processing & Customization:
No
weight:
sixty-five
Place of Origin:
Guangzhou
manufacturer:
Teng Huang
Retail Price
1,288.00USD
重量
kg
- Product Description
-
model TH-1380
structural type Blade type
air flow forty-four thousand and five hundred
rated speed four hundred and forty-five
Motor power one point one
impeller diameter one thousand two hundred and seventy
Fan pressure one hundred and twenty
performance Low noise fan
purpose Ventilation and cooling equipment for factory, workshop, and warehouse
shaft power 1.1KW
Number of blades six
Turbine head material stainless steel
noise sixty-eight
material galvanized steel sheet
airflow direction negative pressure
Processing & Customization No
weight sixty-five
Place of Origin Guangzhou
manufacturer Teng Huang
Description :
Ventilation and cooling system for hardware factory workshopPrinciples of cooling, ventilation, and air conditioning in factory workshops:
The Tenghuang negative pressure fan exhausts air outward, causing a decrease in indoor air pressure and weakening the indoor air, creating a negative pressure space. The air pressure difference is compensated and flows into the room.
In practical use in industrial plants, negative pressure fans are usually installed on one side of the plant, with the air inlet on the other side of the plant. Air flows through the air inlet to the Tenghuang negative pressure fan to form air convection.
During this process, the doors and windows near the negative pressure fan remain closed, forcing air to flow into the workshop through the compensating doors and windows on the intake side. The air flows into the workshop in a queue and orderly manner through the air inlet, passes through the workshop, and is discharged from the workshop by the negative pressure fan. Complete ventilation, with a ventilation rate of up to 99%.
After detailed planning and design, and according to the needs of air exchange, any high temperature, stuffiness, harmful gases, dust, and smoke can be quickly discharged from the workshop, and any ventilation problems can be completely solved in one go. The ventilation function can be achieved within a few seconds by turning on the fan.
Heat dissipation and ventilation system for hardware factory workshopCooling principle of ventilation and cooling system in hardware factory:
Ventilation and cooling: Due to sunlight shining on buildings, machinery, equipment, human bodies, and other heat sources, the temperature in places that require ventilation is higher than outdoors. The negative pressure fan can quickly exhaust indoor hot air, making the room temperature equal to the external temperature, and preventing the temperature inside the workshop from rising.
Air activity takes away human body heat, accelerates sweat evaporation and absorbs human body heat, making the body feel cool, just like natural wind.
The Tenghuang negative pressure fan only has the effect of ventilation and cooling, without the function of cooling. Cooling is the feeling of the human body, and the statement about how much temperature Tenghuang negative pressure fan can lower is ignorant.
When used in conjunction with the temperature curtain system, the temperature in the workshop can be controlled below 28 degrees Celsius during hot summer days.
AfterSalesService :
Key words:- Ventilation and cooling system for hardware factory workshop
More Products
