Xingtai 400 meter obstacle equipment, mobile 400 meter obstacle equipment, crossing the sea and landing equipment

Description :

　　(1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; Xingtai 400m obstacle equipment mobile 400m obstacle equipment crossing the sea and landing on the island 400m obstacle equipment main frame adopts 12 # channel steel welded into an I-shaped base, welded firmly, with a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over.

　　Surface treatment of 400m barrier equipment: all steel parts are subject to surface treatment after primary treatment such as pickling, phosphating, sanding, etc. The imported electrostatic epoxy based powder coating is used for surface treatment. The coating thickness is 70-80um, pencil hardness is up to 3H+, and the test object has passed the GB1771-91 36 hour salt spray test. The coating film has no change, and the single-sided corrosion at the grid is< 2mm. The product has the advantages of acid and alkali resistance, moisture and heat resistance, anti-aging, and beautiful appearance. It can be used indoors and outdoors in humid and acid rain environments, and the product coating formula does not contain toxic elements, so as to avoid damaging the health of users.

　　Structure of 400 meter obstacle equipment: Two supporting columns horizontally support a circular bar (with a constant diameter) to form a horizontal bar

　　The supporting column stands upright on the ground There is a chassis below

　　The 400 meter obstacle equipment uses four ropes (with a diameter of up to 1 centimeter) to pull the horizontal bar upright Four ropes are connected to four ground hooks on the ground

　　400 meter obstacle equipment size: The diameter of the horizontal bar is 2.8 centimeters with an allowable error of+-0.01 centimeters, the distance between two connection points is 240 centimeters with an allowable error of+-1 centimeter, the distance between the joints is at least 200 centimeters with an allowable error of+-1 centimeter, and the distance from the ground to the high-level of the horizontal bar is 275 centimeters with an allowable error of+-1 centimeter

　　Distance between ground hooks: allowable error+-5 centimeters for horizontal direction of 550 centimeters, allowable error+-5 centimeters for vertical direction of 400 centimeters. Function feature: adjustable, must be able to increase the height by 5 centimeters through height adjustment

　　The horizontal bar of 400 meter obstacle equipment must have elasticity Guaranteed not to break Elasticity does not only come from rods The equipment as a whole also has elasticity This is the floor hook Supporting pillars The installation and tension of steel ropes must strictly comply with the requirements The reason for ensuring uniform elasticity The pole and supporting column must be connected by a flexible joint To ensure effective elasticity The lever must allow for turning and sliding movements on it At the same time, it is not easy to slip The entire device must be stable When in use The supporting column cannot move or swing

　　(2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

　　(3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

　　(4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. Xingtai 400 meter obstacle equipment, mobile 400 meter obstacle equipment, crossing the sea and landing equipment

　　(5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards. 400 meter obstacle equipment refers to a runway consisting of eight sets of obstacles including cross stakes, trenches, low walls, high jump platforms, cloud ladders, single plank bridges, high walls, and low stake nets. Because we have to pass through obstacles once in both directions, it should be said that Cheng has to pass through obstacles 16 times. The order of passing the 400 meter obstacle equipment is: 100 meter run → turn around the sign flag → cross the three-step stake → cross the trench → jump over the low wall → pass through the high board jumping platform → pass through the cloud ladder → pass through the single wooden bridge → climb over the high wall → drill and climb the low pile net → turn around the sign flag and return → cross the low pile net → climb over the high wall → bypass the column under the single wooden bridge → pass through the cloud ladder → pass through the high board jumping platform → drill through the hole → jump down and climb up the trench → cross the five step stake → turn around the sign flag → run 100 meters to the finish line.

　　400 meter obstacle equipment 1. Crossing stake: composed of 5 crossing stakes with a diameter of 30 centimeters and a height of 10 centimeters above the ground The midpoints of the three cross stakes on the right are 2.30 meters apart, 30 centimeters away from the centerline of the runway, and 5 meters away from the end line The midpoints of the two spans on the left are 2.30 meters apart and 60 centimeters away from the centerline of the runway. The midpoint of the first span is 6.15 meters away from the end line The cross pile is composed of wooden piles or cement

　　2. Trench: 2 meters in length, width, and depth each The ditch wall should be a vertical plane

　　3. Low wall: 2 meters wide, 1.1 meters high, and 20 centimeters thick The hole is 50 centimeters wide, 40 centimeters high, and its lower edge is 60 centimeters above the ground. It is located on the left side of the low wall The low wall is mainly composed of wooden boards

　　400 meter obstacle equipment 4. High board jumping platform: (High board height 1.80 meters, length 2 meters, width 50 centimeters, thickness 5-8 centimeters.) High platform height 1.5 meters, length and width 1 meter each Low platform height, length, and width each 1 meter High board, high platform, low platform spaced 1 meter apart, made of bricks and cement The horizontal ladder is made of wood and supported by angle iron. It is equipped with at least 15 horizontal bars with a diameter of 3-4 centimeters, four columns with a diameter of 5 centimeters or more, and a height of 2.5 meters

　　5. Single plank bridge: 5 meters long, 1.3 meters high, diameter 20-25 centimeters, bridge plane width 10 centimeters, inclined plate length 2 meters, width 20 centimeters The columns under the bridge are spaced 1-1.30 meters apart and should be painted with red and white colors, mainly composed of steel pipes

　　400 meter obstacle equipment 6. High wall: 2 meters wide, 2 meters high, and 20 centimeters thick It is mainly composed of wooden boards

　　7. Low pile net: It consists of 12 columns arranged in two rows, with a row spacing of 2 meters and a spacing of 1 meter. The piles are 50 centimeters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of piles to form a pile net. The ground below the net should be made of a loose and soft sand layer The column is composed of steel pipes

　　The 400 meter obstacle course for crossing the sea and landing on the island is designed to simulate the actual combat environment of crossing the sea and landing operations, with a focus on improving the adaptability of individual soldiers to sea combat. Following the laws of physical training and the principle of system combination, it simulates the special states of loading, crossing, transfer, and beach landing to varying degrees, integrating collective ability, skills, and psychological training to meet the training needs of crossing the sea and landing operations. The venue adopts 4 turns, with a total of 10 projects, including the runway and obstacles set at intervals on the runway.

　　Detailed specifications of 400 meter obstacle equipment; Xingtai 400 meter obstacle equipment, mobile 400 meter obstacle equipment, crossing the sea and landing equipment

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. Xingtai 400 meter obstacle equipment, mobile 400 meter obstacle equipment, crossing the sea and landing equipment

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. Xingtai 400m Obstacle Equipment Mobile 400m Obstacle Equipment Cross Sea Island Equipment Main Business: Training 400m Obstacle Equipment Manufacturer, 400m Obstacle Equipment Manufacturer, Dezhou Obstacle Equipment, Fire Training Single Wooden Bridge Manufacturer, 400m Obstacle Equipment, Single Wooden Bridge, High Wall Low Platform, Fire Obstacle Equipment Manufacturer. The necessary auxiliary tool for military academy training is the 400 meter obstacle equipment, which is indispensable for every military academy. The price for a complete set of 400 meter obstacle equipment is directly sold by the factory.

　　Main business: quotation for 400 meter obstacle equipment,

　　Training high and low wall prices, where can I buy equipment for the military 300 meter obstacle race, and supply of fire training single plank bridges. And our team's training equipment is supplied to the country. Please contact us if you need it. We carry out customized processing within the country. Our cooperative teams include: Fujian Ningde 400m, Gansu Lanzhou 68029 team, Beijing 66429 high wall obstacle board, Ningxia Wuzhong 68242, Henan Jiaxian 54647 team, Shaanxi Xi'an Military Region, Shaanxi Baoji Military Region, Hebei Baoding 66105400m, Hubei Wuhan Military Region 400m, Shijiazhuang 400m, Shanxi Xinzhou 66014 team pile net, high and low jumping platform, collapsed pile, wave wood, high and low jumping platform, horizontal ladder, tire wall, soft rope inclined ladder, fixed wheel, three person cooperation frame, turning flag and other obstacle equipment suitable for military, navy, school training, etc. We sincerely welcome customers in need to consult and negotiate business! The standard 400 meter obstacle equipment manufacturer's phone number is Yingde, and the production rate of fixed length pipes has decreased significantly compared to regular length pipes. It is reasonable for the production enterprise to request a price increase. The increase in price varies among companies, generally around 10% above the base price. C、 Multiple length: The multiple length should be within the usual length range, and the contract should specify the single length and the multiples that make up the total length (such as 3000mm × 3, which is a multiple of 3000mm and a total length of 9000mm). In practical operation, an allowable positive deviation of 20mm should be added to the total length, and each single foot length should have a margin for cutting. Taking structural pipes as an example, it is stipulated to leave a cutting allowance of 5-10mm for outer diameters ≤ 159mm and 10-15mm for outer diameters>159mm. If there is no length deviation or cutting allowance specified in the standard, the supply and demand parties should negotiate and indicate it in the contract. The double length is the same as the fixed length, which will significantly reduce the yield rate of production enterprises. Standard 400m obstacle equipment manufacturer phone number Yingde enrollment target: Undergraduate graduates who have received training from command colleges and have worked continuously for more than 2 years, with a duration of 2 and a half to 3 years. Graduates are suitable for command work, military or higher level government work, theoretical research and teaching work. China University of Civil Defense Science and Technology, formerly known as Harbin Engineering Institute, is the cradle of future scientists, technical experts, and new command officers. National University of Defense Technology is a national key comprehensive university under the dual leadership of the Ministry of National Defense and is included in the key construction of the national "985 Project" and "211 Project". The predecessor of the school was the Engineering College founded in Harbin, Heilongjiang Province in 1953, abbreviated as "Ha * * *". In 1970, the main body of the school was relocated to Changsha and renamed Changsha Institute of Technology. In 1978, it was rebuilt as National University of Defense Technology. The school is located in Shashi, Hunan, China, covering a total area of 373 hectares. After more than 50 years of construction and development, the school has become a comprehensive university covering 10 disciplines including science, engineering, management, economics, philosophy, literature, education, law, and history. The swinging platform comprises a platform surface and an obstacle column irregularly fixed on the platform surface. The bottom of the platform surface is equipped with a swinging device composed of rollers and arc-shaped supports. Obstacles also include soft bridges, swinging ladders, and cross nets, and the arrangement order of obstacles is soft bridges, spiral ladders, rope nets, tire climbing platforms, swinging platforms, swinging ladders, and cross nets. Obstacles also include high and low horizontal beams, blocking walls, and simulated beaches. The order of obstacle arrangement is soft bridge, spiral ladder, high and low horizontal beams, rope net, tire climbing platform, swinging platform, swinging horizontal ladder, cross net, blocking wall, and simulated beach. The length of the obstacle course is 100-120 meters, the width is 20-25 meters, and the runway is 300-500 meters long. It is divided into four sections with three turning points arranged in the training field, namely the starting point, soft bridge, spiral ladder, and high and low crossbars; ***Folding point, rope net, tire climbing platform, swinging platform; Second turning point, shaking horizontal ladder, crossing net, blocking wall; Third turning point, simulated beach, endpoint.

　　High platform; Height of 1.5 meters, length and width of 1 meter each. Xingtai 400 meter obstacle equipment, mobile 400 meter obstacle equipment, crossing the sea and landing equipment

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. Xingtai 400 meter obstacle equipment, mobile 400 meter obstacle equipment, crossing the sea and landing equipment

　　400 meter obstacle equipment manufacturer tells you: the process of making 400 meter obstacle equipment

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. Xingtai 400 meter obstacle equipment, mobile 400 meter obstacle equipment, crossing the sea and landing equipment

　　2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

　　The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users.

　　Anqing Practice Competition Training Equipment Mobile 400m Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price

AfterSalesService :

• 400 meter obstacle equipment