Nanjing 400 meter obstacle equipment 400 meter obstacle equipment 100 meter obstacle equipment

Description :

　　(1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; Nanjing 400m Obstacle Equipment 400m Obstacle Equipment 100m Obstacle Equipment 400m Obstacle Equipment is mainly used for officers and soldiers to master and improve skills such as running, jumping, climbing, support, balance, and crawling required for combat operations, enhance physical fitness such as speed, endurance, and sensitivity, cultivate brave and tenacious will, and lay a good foundation for overcoming various obstacles during wartime. Taizhou 400 meter obstacle equipment 400 meter obstacle training equipment 100 meter obstacle equipment

　　The 400 meter obstacle course consists of the following seven obstacles: cross pile, trench, low wall, high board jumping platform, horizontal ladder, single wooden bridge, high wall, and low pile net

　　400 meter obstacle equipment 1. Crossing stake: composed of 5 crossing stakes with a diameter of 30 centimeters and a height of 10 centimeters above the ground The midpoints of the three spans on the right are 2.30 meters apart and 30 centimeters away from the centerline of the runway. The midpoint of one span is 5 meters away from the end line The midpoints of the two span stakes on the left are 2.30 meters apart and 60 centimeters away from the centerline of the runway. The midpoint of one span stake is 6.15 meters away from the end line The cross pile is composed of wooden piles and cement 400 meter obstacle equipment 2. Trench: 2 meters in length, width, and depth each The ditch wall should be a vertical plane 3. Low wall: 2 meters wide, 1.1 meters high, and 20 centimeters thick The hole is 50 centimeters wide, 40 centimeters high, and its lower edge is 60 centimeters above the ground. It is located on the left side of the low wall The low wall is mainly composed of wooden boards. 4. High board jumping platform horizontal ladder: (The high board is 1.80 meters high, 2 meters long, 50 centimeters wide, and 5-8 centimeters thick.) The high platform is 1.5 meters high, 1 meter long, and 1 meter wide Low platform height, length, and width each 1 meter High board, high platform, low platform spaced 1 meter apart, made of bricks and cement The horizontal ladder is made of wood and supported by angle iron. It is equipped with at least 15 horizontal bars with a diameter of 3-4 centimeters, four columns with a diameter of 5 centimeters or more, and a height of 2.5 meters

　　400 meter obstacle equipment 5. Single plank bridge: 5 meters long, 1.3 meters high, diameter 20-25 centimeters, bridge plane width 10 centimeters, inclined board length 2 meters, width 20 centimeters The columns under the bridge are spaced 1-1.30 meters apart and should be painted with red and white colors, mainly composed of steel pipes Putian set of 400m obstacle equipment standard 400m 400m obstacle

　　6. High wall: width, height of 2 meters each, thickness of 20 centimeters It is mainly composed of wooden boards 7. Low pile net: It consists of 12 columns arranged in two rows, with a row spacing of 2 meters and a spacing of 1 meter. The piles are 50 centimeters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of piles to form a pile net. The ground below the net should be made of a loose and soft sand layer The column is composed of steel pipes

　　400 meter obstacle equipment, training equipment, sports equipment, with 20 years of industry experience, our products are sold well in China

　　Three hundred meter obstacle training ground, four hundred meter obstacle, parallel bars, horizontal bars, flying wheel (fixed roller), outdoor fitness equipment, comprehensive training equipment,

　　Five types of training equipment, including 400 meter sea crossing and island landing, dog equipment, navy roller, hanging ladder, sentry post, customized training equipment, form run, punch target stand, sandbag, sandbag stand, hunter training equipment, American obstacle equipment, dog obstacle equipment, 500 meter obstacle, rope climbing pole combination, rope climbing pole customized equipment, wooden horse pedal, and more

　　(2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

　　(3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

　　(4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. Nanjing 400 meter obstacle equipment 400 meter obstacle equipment 100 meter obstacle equipment

　　(5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards. The composition and sequence of manufacturers of training equipment for crossing the sea and landing on the island in Laiwu are as follows:

　　100 meter run → turn around the flag → cross the three-step pile → cross the trench → jump over the low wall → pass through the high board jumping platform → pass through the cloud ladder → pass through the single wooden bridge → climb over the high wall → drill and climb the low pile net → turn around the flag and return → cross the low pile net → climb over the high wall → bypass the standing column under the single wooden bridge → pass through the cloud ladder → pass through the high board jumping platform → drill through the hole → jump down and climb up the trench → cross the five step pile → turn around the flag → run 100 meters to the finish line. The "Physical Exercise Standard Assessment Regulations" stipulate that starting from a 400 meter obstacle can be done in a standing or squatting position, and starting blocks are not allowed. When conducting the 400 meter obstacle assessment for common subjects, the starting method must be a lying down position. Jiaxing set of 400 meter obstacle equipment, 400 meter obstacle equipment, 100 meter obstacle equipment

　　Yancheng 400m Obstacle Movement 400m Obstacle Equipment 100m Obstacle Equipment Through Laiwu Crossing the Sea and Landing Training Equipment Manufacturer's Breathing Method:

　　At the beginning of running on flat ground, naturally deepen your breathing, and the rhythm of your breathing should be coordinated with the running rhythm. At the end of the run, the frequency and depth of your breathing should increase, and when passing through obstacles, you can use "wide range" force. After passing through obstacles, one should adjust their breathing in a timely manner, focusing on exhaling air. Breathing is done using the nose and half open mouth, and the breathing method is basically the same as that of middle and long-distance running.

　　Notes for manufacturers of training equipment for crossing the sea and landing on the island in Laiwu:

　　1. Climbing over a high wall. The body passes through a high wall.

　　2. Walk around the bridge pillar. The body must go around every pillar.

　　3. By jumping on a high board. The body passes through two tabletops and a high board. Pingliang 400m Obstacle Standard 400m Obstacle Manufacturer

　　4. Drill through the hole. The body passes through the hole.

　　5. Jump down and climb up the trench. Jump off the trench and climb up again.

　　6. 5 steps to cross the pile. Step on the 5 pile surfaces one by one, and do not touch the ground between the front and rear marking lines with your body.

　　7. During the journey, one should pass through obstacles according to the prescribed methods for each obstacle. If an obstacle is not passed according to the prescribed action, the obstacle must be re passed, otherwise the score will not be counted.

　　Detailed specifications of 400 meter obstacle equipment; Nanjing 400 meter obstacle equipment 400 meter obstacle equipment 100 meter obstacle equipment

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. Nanjing 400 meter obstacle equipment 400 meter obstacle equipment 100 meter obstacle equipment

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. Nanjing 400m obstacle equipment 400m obstacle equipment 100m obstacle equipment 400m obstacle board height board specifications:

　　The product specifications for the mobile badminton column include a base length of cm, a width of cm, a height of cm, and a total column height of m. The product material is a mobile badminton column with a base weight of KG, using a cast iron base, double wheel movement, and electrostatic spraying. The badminton column, also known as the badminton stand, is made of iron material. The standard badminton column badminton stand consists of two parts: the column pole and the column chassis. A pulley device is located near the middle of the column pole to tighten the rope of the ball net. The column chassis is composed of a certain amount of iron blocks, connected to the lower end of the badminton stand pole, and balanced with the center of gravity of the net pole. The badminton pillars produced by our company include electroplated rod badminton pillars, spray painted badminton pillars, mobile badminton pillars, badminton referee chair material cast iron bases, ABS cement bases, pillar specifications in meters, diameter in centimeters, height in meters, weight in kilograms. The product features precision processing using new materials, a large base, good stability, and equipped with linked moving wheels, making it easier to push. The badminton pillars can be moved directly by pushing them, and the wheels are made of nylon products, which are durable and long-lasting.

　　Detailed specifications of 400 meter obstacle board; Yancheng 400m Obstacle Equipment 400m Obstacle Training Equipment 100m Obstacle Equipment

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line.

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick.

　　High platform; Height of 1.5 meters, length and width of 1 meter each.

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters. Xingtai 400 meter obstacle equipment mobile 400 meter obstacle equipment 400 meter obstacle

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a sand layer.

　　Most sports projects can be completed through the joint participation of student groups. Therefore, for such sports, there is no need to discuss with individual students, and the results of student groups can be directly tested or summarized by student group representatives, which can greatly save classroom time and leave more time for students to participate in sports activities. The interaction with students as a whole occupies an important position in the minds of primary school students. The "authoritative" style is obviously not in line with the development requirements of the new curriculum reform. Therefore, sports should change the previous teaching mentality, strive to "blend in" with students, participate in student activities on an equal footing, and achieve overall interaction with students, as well as create a sense of trust among students and build a good teacher-student relationship.

　　High platform; Height of 1.5 meters, length and width of 1 meter each. Nanjing 400 meter obstacle equipment 400 meter obstacle equipment 100 meter obstacle equipment

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. Nanjing 400 meter obstacle equipment 400 meter obstacle equipment 100 meter obstacle equipment

　　400 meter obstacle equipment manufacturer tells you: the process of making 400 meter obstacle equipment

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. Nanjing 400 meter obstacle equipment 400 meter obstacle equipment 100 meter obstacle equipment

　　2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

　　The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users.

　　Anqing Practice Competition Training Equipment Mobile 400 meter Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price Nanjing 400 meter Obstacle Equipment 400 meter Obstacle Equipment 100 meter Obstacle Equipment

AfterSalesService :

• 400 meter obstacle equipment