Sanming 400m obstacle equipment 400m obstacle equipment crossing the sea and landing on the island equipment

Description :

　　(1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; The composition and passing order of Sanming 400 meter obstacle equipment, 400 meter obstacle equipment, crossing the sea and landing equipment, Laiwu crossing the sea and landing training equipment manufacturers are as follows:

　　100 meter run → turn around the flag → cross the three-step pile → cross the trench → jump over the low wall → pass through the high board jumping platform → pass through the cloud ladder → pass through the single wooden bridge → climb over the high wall → drill and climb the low pile net → turn around the flag and return → cross the low pile net → climb over the high wall → bypass the standing column under the single wooden bridge → pass through the cloud ladder → pass through the high board jumping platform → drill through the hole → jump down and climb up the trench → cross the five step pile → turn around the flag → run 100 meters to the finish line. The "Physical Exercise Standard Assessment Regulations" stipulate that starting from a 400 meter obstacle can be done in a standing or squatting position, and starting blocks are not allowed. When conducting the 400 meter obstacle assessment for common subjects, the starting method must be a lying down position. Huai'an 400m Obstacle Equipment Standard 400m 100m Obstacle Equipment

　　Quanzhou 400m Obstacle Training Obstacle Equipment 100m Obstacle Equipment Breathing Method from Laiwu Cross Sea Island Training Equipment Manufacturer:

　　At the beginning of running on flat ground, naturally deepen your breathing, and the rhythm of your breathing should be coordinated with the running rhythm. At the end of the run, the frequency and depth of your breathing should increase, and when passing through obstacles, you can use "wide range" force. After passing through obstacles, one should adjust their breathing in a timely manner, focusing on exhaling air. Breathing is done using the nose and half open mouth, and the breathing method is basically the same as that of middle and long-distance running.

　　Notes for manufacturers of training equipment for crossing the sea and landing on the island in Laiwu:

　　1. Climbing over a high wall. The body passes through a high wall.

　　2. Walk around the bridge pillar. The body must go around every pillar.

　　3. By jumping on a high board. The body passes through two tabletops and a high board. Hanzhong 400m Obstacle Training 300m Obstacle Armed 400m Obstacle

　　4. Drill through the hole. The body passes through the hole.

　　5. Jump down and climb up the trench. Jump off the trench and climb up again.

　　6. 5 steps to cross the pile. Step on the 5 pile surfaces one by one, and do not touch the ground between the front and rear marking lines with your body.

　　7. During the journey, one should pass through obstacles according to the prescribed methods for each obstacle. If an obstacle is not passed according to the prescribed action, the obstacle must be re passed, otherwise the score will not be counted.

　　(2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

　　(3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

　　(4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. Sanming 400m obstacle equipment 400m obstacle equipment crossing the sea and landing on the island equipment

　　(5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards. The projects with 400 obstacles include double rope pool, tire wall, single plank bridge, floor, soft inclined rope, high railing, square window, circular hole, Irish high board, continuous low wall, horizontal hanging ladder, inclined wall trench, and low pile net. On a 300 meter long (reversible) runway, it is required that the site be flat, the soil be hard, the edges be paved with curbstones, and the adjacent edges of various obstacles be at a certain distance. The low price bar for 400 meter obstacle equipment is aimed at cultivating high-quality and long-term stable supply of 400 meter obstacle equipment manufacturers in Jiuquan. It is an essential part of strengthening the body and making good use of high and low bars. Choosing the right manufacturer to improve the production process of high and low bars ensures shipment and customer satisfaction. You cannot make a wrong comparison. Sanming 400m Obstacle Equipment Standard 400m Armed 400m Obstacle

　　The 400 barrier price personnel use tools to assemble and fully ensure the strength of the instrument connection. The packaging uses bubble pads and woven bags for double packaging, which is beautiful and safe to ensure the needs of long-distance transportation. Product Material: Steel, and strictly produced according to the materials specified by the National Sports Goods Quality Inspection Center. We guarantee the same quality at the same price and provide genuine products. Please feel free to purchase with confidence. Weinan 400m Obstacle 400m Obstacle Training Equipment 100m Obstacle Equipment

　　The 400 meter obstacle refers to a runway consisting of eight sets of obstacles, including a cross pile, trench, low wall, high board jumping platform, cloud ladder, single wooden bridge, high wall, and low pile net. Because we have to pass through obstacles once in both directions, it should be said that Cheng has to pass through obstacles 16 times.

　　For the 400 meter obstacle, it is necessary to focus on swinging and soaring movements, as well as appropriate stopping and exertion movements. Chinese athletes are also skilled in using the support swing of the parallel bars, and in hanging movements, they have also entered the Shanxi Yuci Wujing School's 400 meter obstacle equipment manufacturer for easier quality steps.

　　400 obstacle quality is easier. Hebei Dachuang Cultural and Sports Equipment Sales Department sincerely welcomes your call. The product styles are all suitable for the national quality inspection standard Handan 400 meter obstacle equipment standard 400 meter manufacturer

　　400 obstacles (height of 1.80 meters, length of 2 meters, width of 50 centimeters, thickness of 5-8 centimeters), high platform height of 1.5 meters, length and width of 1 meter each Low platform height, length, and width each 1 meter High board, high platform, low platform spaced 1 meter apart, made of bricks and cement The horizontal ladder is made of wood and supported by angle iron. It is equipped with at least 15 horizontal bars with a diameter of 3-4 centimeters, four columns with a diameter of 5 centimeters or more, and a height of 2.5 meters

　　Detailed specifications of 400 meter obstacle equipment; Sanming 400m obstacle equipment 400m obstacle equipment crossing the sea and landing on the island equipment

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. Sanming 400m obstacle equipment 400m obstacle equipment crossing the sea and landing on the island equipment

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. Sanming 400m Obstacle Equipment 400m Obstacle Equipment Crossing the Sea and Landing on Islands Guizhou 400m Obstacle Equipment Set Price Fire Training Low Pile Net Independent Wooden Bridge Manufacturer Xining 400m Obstacle Equipment Training Obstacle Equipment Hundred meter Obstacle Equipment

　　Physical allocation for 400 meter obstacle running. The 400 meter obstacle race requires running at a "uniform" speed to complete the distance. The 400 meter obstacle requires running 100 meters on flat ground before passing through the obstacle. It has to travel back and forth 200 meters, passing through 14 obstacles. Smoothly and quickly passing through obstacles is an important guarantee for completing the journey. Therefore, running on flat ground for the first 100 meters requires speed, ease, and effort. In the process of running between obstacles, there should be a step point adjustment stage, that is, after passing through obstacles, the step point should be adjusted well, and before passing through the next obstacle, the running speed should be slightly increased, with a clear rhythm, to achieve the goal of smoothly and quickly passing through obstacles. When all obstacles are passed, the race enters the finish line, demanding strength and carrying forward the spirit of tenacious struggle to reach the finish line. A set of 400 meter obstacle equipment in Baoji. Mobile 400 meter obstacle equipment. 400 meter obstacle equipment

　　Composition, set at least 1

　　Manufacturer's process for 400 meter obstacle equipment:

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness.

　　A set of obstacle equipment with a thickness of 400 meters made of fir wood in the middle, Guizhou. Price: fire training, low pile net, single wooden bridge manufacturer

　　Stability is good, and a normal adult will not flip over when turning over. A set of 400m obstacle equipment in Tongchuan, 400m obstacle training equipment, 100m obstacle equipment

　　2. Paint (spray coating), process: There are two colors: camouflage and military green

　　Polish both the wooden board and the main frame to ensure that there are no burrs on the main frame and wooden board, and that they are not easy to hurt hands. Apply surface spraying and painting.

　　Surface treatment of 400 meter obstacle equipment manufacturer: All steel parts are treated with primary treatments such as acid washing, phosphating, and sanding, and then sprayed with imported electrostatic epoxy powder for surface treatment. The coating thickness is 70-80um, and the pencil hardness reaches 3H+

　　Expansion equipment: Langmu covers an area of 400 meters in Guizhou. A set of obstacle equipment is available at a price. Fire training: Low pile net. Single wooden bridge manufacturer. 400 meter obstacle training method

　　100 meters: sprint 100 meters to the opposite Ningde 400 meters obstacle equipment standard 400 meters obstacle 100 meters obstacle equipment

　　Two hundred meters: through five step stakes, jumping deep pits, flying low boards, climbing high benches, crossing high and low platforms, climbing cloud ladders, climbing single wooden bridges, high board walls, and drilling wire mesh

　　Three hundred meters: jumping low pile net, high slab wall, drilling bridge pier, cloud ladder, high and low platform, drilling low slab wall, deep pit (2M), three-step pile

　　400m: 100m Sprint Return to Guizhou 400m Obstacle Equipment Set Price Fire Training Low Pile Net Single Wooden Bridge Manufacturer

　　High platform; Height of 1.5 meters, length and width of 1 meter each. Sanming 400m obstacle equipment 400m obstacle equipment crossing the sea and landing on the island equipment

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. Sanming 400m obstacle equipment 400m obstacle equipment crossing the sea and landing on the island equipment

　　400 meter obstacle equipment manufacturer tells you: the process of making 400 meter obstacle equipment

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. Sanming 400m obstacle equipment 400m obstacle equipment crossing the sea and landing on the island equipment

　　2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

　　The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users.

　　Anqing Practice Competition Training Equipment Mobile 400m Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price Sanming 400m Obstacle Equipment 400m Obstacle Equipment Crossing the Sea Island Equipment

AfterSalesService :

• 400 meter obstacle equipment