Changzhou 400m Obstacle Equipment Training 300m Obstacle Manufacturer

Description :

　　(1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; Changzhou 400m Obstacle Equipment Training 300m Obstacle Equipment Manufacturer The main frame of the 400m obstacle equipment is made of 12 # channel steel welded into an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over.

　　Surface treatment of 400m barrier equipment: all steel parts are subject to surface treatment after primary treatment such as pickling, phosphating, sanding, etc. The imported electrostatic epoxy based powder coating is used for surface treatment. The coating thickness is 70-80um, pencil hardness is up to 3H+, and the test object has passed the GB1771-91 36 hour salt spray test. The coating film has no change, and the single-sided corrosion at the grid is< 2mm. The product has the advantages of acid and alkali resistance, moisture and heat resistance, anti-aging, and beautiful appearance. It can be used indoors and outdoors in humid and acid rain environments, and the product coating formula does not contain toxic elements, so as to avoid damaging the health of users.

　　Structure of 400 meter obstacle equipment: Two supporting columns horizontally support a circular bar (with a constant diameter) to form a horizontal bar Nanping's 400 meter obstacle equipment training, 300 meter obstacle armament, and 400 meter obstacle training

　　The supporting column stands upright on the ground There is a chassis below

　　The 400 meter obstacle equipment uses four ropes (with a diameter of up to 1 centimeter) to pull the horizontal bar upright Four ropes are connected to four ground hooks on the ground

　　400 meter obstacle equipment size: The diameter of the horizontal bar is 2.8 centimeters with an allowable error of+-0.01 centimeters, the distance between two connection points is 240 centimeters with an allowable error of+-1 centimeter, the distance between the joints is at least 200 centimeters with an allowable error of+-1 centimeter, and the distance from the ground to the high-level of the horizontal bar is 275 centimeters with an allowable error of+-1 centimeter

　　Distance between ground hooks: allowable error+-5 centimeters for horizontal direction of 550 centimeters, allowable error+-5 centimeters for vertical direction of 400 centimeters. Function feature: adjustable, must be able to increase the height by 5 centimeters through height adjustment

　　The horizontal bar of 400 meter obstacle equipment must have elasticity Guaranteed not to break Elasticity does not only come from rods The equipment as a whole also has elasticity This is the floor hook Supporting pillars The installation and tension of steel ropes must strictly comply with the requirements The reason for ensuring uniform elasticity The pole and supporting column must be connected by a flexible joint To ensure effective elasticity The lever must allow for turning and sliding movements on it At the same time, it is not easy to slip The entire device must be stable When in use The supporting column cannot move or swing A set of 400 meter obstacle equipment training in Putian, 300 meter obstacle crossing and island landing equipment

　　(2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

　　(3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

　　(4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. Changzhou 400m Obstacle Equipment Training 300m Obstacle Manufacturer

　　(5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards. New 400 meter obstacle product description (also known as: five or eight items)

　　New 400m Obstacle Product Description

　　1. Low pile net:

　　Main dimensions: width 2 meters, height 0.87 meters, length 4.88 meters; Chain net is 0.45 meters, 0.55 meters, and 0.65 meters above the ground, with adjustable third level;

　　Main components: consisting of one soft chain mesh and four regulating tubes; Changzhou 400m Obstacle Equipment Training 300m Obstacle Manufacturer

　　Main materials: The main column is made of ? 114mm steel pipe with a wall thickness greater than or equal to 3mm; The soft chain mesh is composed of welded steel pipes with a diameter of ? 6 steel chains and a diameter of ? 76X3 mm. The regulating pipe is made of ? 90 mm steel pipe, and the pipe wall thickness is greater than or equal to 3 mm. It is welded with hemispherical plugs;

　　Features: It can be disassembled as a whole without the need for on-site welding; Can be moved multiple times without damaging the original equipment;

　　Metal surface coating: using surface sandblasting treatment, primer: spraying epoxy rich powder coating, can ensure that it will not change color for five years.

　　2. 2.4-meter high wall:

　　·Main dimensions: width of 2 meters, height of 2.4 meters, thickness of 0.2 meters; Changzhou 400m Obstacle Equipment Training 300m Obstacle Manufacturer

　　·Main components: Steel wood structure, consisting of a main frame and upper wooden boards;

　　·Main materials: The main frame is made of steel plates with a thickness greater than or equal to 4 millimeters, bent into 140mm channel steel and welded with 60X30X2.5mm rectangular pipes;

　　·The upper board is made of anti-corrosion wood with a thickness greater than or equal to 0.03 meters;

　　Features: The equipment is detachable as a whole and does not require on-site welding; Can be moved multiple times without damaging the original equipment;

　　Metal surface coating: using surface sandblasting treatment, primer: spraying epoxy rich powder coating, can ensure that it will not change color for five years.

　　3

　　Air soft network:

　　Main dimensions: Soft mesh width of 5 meters, height of 3 meters, and length of 10 meters;

　　Main components: divided into rib frame, tire, soft chain mesh, and column components; Changzhou 400m Obstacle Equipment Training 300m Obstacle Manufacturer

　　Main materials: The main column is made of ? 114mm steel pipe, with a wall thickness greater than or equal to 3.5mm; Is the ribbed wooden frame used? 60x3mm steel pipes with a spacing of 0.39m; The soft chain mesh is composed of 100mm channel steel welded with 6 steel chains, and the steel chain spacing is 0.25 meters; 10 tires with a diameter of 580x200mm;

　　Features: The equipment is detachable as a whole and does not require on-site welding; Can be moved multiple times without damaging the original equipment; Changzhou 400m Obstacle Equipment Training 300m Obstacle Manufacturer

　　Metal surface coating: using surface sandblasting treatment, primer: spraying epoxy rich powder coating, can ensure that it will not change color for five years.

　　4

　　Elevated speed descent:

　　Main dimensions: width 4.83 meters, height 6 meters;

　　Main components: composed of main frame, ladder, inclined sliding rod, and straight sliding rod; Longyan 400 meter obstacle equipment 400 meter obstacle equipment 100 meter obstacle equipment

　　Main materials: The main column is made of ? 164mm steel pipe, with a wall thickness greater than or equal to 4.5mm; Sliding rod, inclined sliding rod

　　Using a 90mm steel pipe with a wall thickness greater than or equal to 3mm; Are the columns on both sides of the ladder used? 60X2.5mm steel pipe,? 42X2.5mm steel pipe spacing 0.355m ladder support;

　　Features: The equipment is detachable as a whole and does not require on-site welding; Can be moved multiple times without damaging the original equipment; Changzhou 400m Obstacle Equipment Training 300m Obstacle Manufacturer

　　Metal surface coating: using surface sandblasting treatment, primer: spraying epoxy rich powder coating, can ensure that it will not change color for five years.

　　5

　　Diagonal swinging rope:

　　Main dimensions: width 4 meters, height 7.5 meters, length 14 meters; The distance between the inner sides of the two platforms is 7 meters;

　　Main components: consisting of a swinging rope main frame, platform, inclined plate, and protective sponge pad; Yulin set of 400 meter obstacle equipment training for 300 meter obstacle and 400 meter obstacle

　　Main materials: The main column is made of ? 164mm steel pipe, with a wall thickness greater than or equal to 4.5mm; The platform has a height of 1.7 meters, a width of 1 meter, and a length of 3.85 meters. The main materials used are 80 channel steel, ? 140 × 3mm steel pipe, and 2.5mm thick anti slip steel plate; The inclined plate is 3.2 meters long and 3.85 meters wide, mainly made of 80 channel steel and 2.5mm thick anti slip steel plate;; 40mm diameter nylon rope with a length of 7m; Changzhou 400m Obstacle Equipment Training 300m Obstacle Manufacturer

　　Features: The equipment is detachable as a whole and does not require on-site welding; Can be moved multiple times without damaging the original equipment;

　　6

　　Gaolan:

　　Main dimensions: length 4 meters, height 2 meters, width 0.3 meters;

　　Main components: divided into three main frames with heights of 1.5 meters, 2 meters, and 0.8 meters, with a spacing of 0.6 meters between each group;

　　Main materials: The main column is made of ? 76 steel pipe, with a wall thickness greater than or equal to 2.75 millimeters; Zhangye 400m Obstacle Training 300m Obstacle Armed 400m Obstacle

　　Features: The equipment is detachable as a whole and does not require on-site welding; Can be moved multiple times without damaging the original equipment;

　　Metal surface coating: using surface sandblasting treatment, primer: spraying epoxy rich powder coating, can ensure that it will not change color for five years.

　　7

　　Irish High Board: Tianshui 400m Obstacle Equipment Standard 400m 400m Obstacle

　　Main dimensions: length 5 meters, height 2-1.8 meters, width 0.4 meters; (3.257 meters long, 2 meters high; 1.743 meters long)

　　Baoji 400m Obstacle Standard 400m Obstacle Manufacturer

　　Main components: Steel wood structure, consisting of a main frame and upper wooden boards;

　　Main materials: The main column is made of ? 140mm steel pipe with a wall thickness greater than or equal to 3.5mm; Wooden board material protection

　　The rotten wood board is 0.4 meters wide and 40 millimeters thick; Wuwei 400m Obstacle Equipment Training 300m Obstacle Armed 400m Obstacle

　　Features: The equipment is detachable as a whole and does not require on-site welding; Can be moved multiple times without damaging the original equipment;

　　Metal surface coating: using surface sandblasting treatment, primer: spraying epoxy rich powder coating, can ensure that it will not change color for five years.

　　8

　　Curved rib:

　　Main dimensions: width 0.5 meters, arc top height 3 meters, length 9.886 meters;

　　Main materials: The main columns and horizontal pipes are made of ? 114mm steel pipes, with a wall thickness of 3mm; Ribs are made of ? 33

　　Millimeter steel pipe, with a wall thickness of 3 millimeters and a spacing of 0.3 meters; Changzhou 400m Obstacle Equipment Training 300m Obstacle Manufacturer

　　Features: The equipment is detachable as a whole and does not require on-site welding;

　　Metal surface coating: using surface sandblasting treatment, primer: spraying epoxy rich powder coating, can ensure that it will not change color for five years.

　　Detailed specifications of 400 meter obstacle equipment; Changzhou 400m Obstacle Equipment Training 300m Obstacle Manufacturer

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. Changzhou 400m Obstacle Equipment Training 300m Obstacle Manufacturer

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. If it weren't for Zhao Jiwei's shoulder dislocation being reimbursed this season, Gao Shiyan might not have been included in the Liaoning men's basketball team's 12 man squad; If it weren't for Cong Mingchen's absence from the Star Rui tournament for some reason, Gao Shiyan wouldn't have had the opportunity to participate in this Star Weekend. From this perspective, Gao Shiyan is fortunate. Statistics show that so far this season, Gao Shiyan has only had a record of playing in 12 games, with an average playing time of only two and a half minutes per game. Taizhou 400m Obstacle Equipment Training 300m Obstacle 400m Obstacle

　　However, being able to occupy a place in the Liaoning men's basketball team, which is rich in defenders, is enough to show that Gao Shiyan is not an ordinary person. Although this season is Gao Shiyan's "rookie" season in the CBA, he has previously represented "national" teams - Gao Shiyan, born in 1996, was selected for the U19 national youth team. In the North Star Rui team, Gao Shiyan is not a player, nor is he a major contender for MVP. But in the Star Rui tournament, which emphasized talent and self-expression without constraints or tactics, this young man who was unknown in the club turned the entire third quarter into a stage for his own performance, and even improvised Harden's classic celebratory move of "sprinkling salt". If it weren't for the dogmatic selection of MVP, Xu Tao's Star Rui MVP honor should belong to Gao Shiyan.

　　In the Liaoning team, Gao Shiyan doesn't speak much about the 400 meter obstacle facility, but he trains very hard. Gao Shiyan once said that his idol is Yang Ming, and judging from his performance in the Star Rui tournament, he has the potential to become a defender. However, the Liaoning men's basketball defense line is indeed full of talents. Whether in the national youth team or currently in the Liaoning team, Gao Shiyan is Zhao Jiwei's substitute, let alone competing with Hudson and Guo Ailun for the starting position. But with time, Gao Shiyan will definitely give Liaoning fans a surprise. 400m Obstacle Facilities Yancheng 400m Obstacle Training Obstacle Equipment 400m Obstacle

　　High platform; Height of 1.5 meters, length and width of 1 meter each. Changzhou 400m Obstacle Equipment Training 300m Obstacle Manufacturer

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. Changzhou 400m Obstacle Equipment Training 300m Obstacle Manufacturer

　　400 meter obstacle equipment manufacturer tells you: the process of making 400 meter obstacle equipment

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. Changzhou 400m Obstacle Equipment Training 300m Obstacle Manufacturer

　　2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

　　The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users.

　　Anqing Practice Competition Training Equipment Mobile 400m Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price Changzhou 400m Obstacle Equipment Training 300m Obstacle Manufacturer

AfterSalesService :

• 400 meter obstacle equipment