Laboratory emulsifier cosmetic equipment

Description :

　　Principle of high shear homogenization emulsifier equipment: Installed at the bottom of the container, the high shear dispersion emulsifier can provide a wide range of processing capacity inside the kettle. The specially designed sealing structure can ensure that the material does not leak and can adapt to various viscosity and process requirements. The applicable process is suitable for the dispersion, emulsification, homogenization, and mixing of materials such as cream, emulsion, and suspension agent.

　　The ultra-high speed high shear homogenizer emulsifier is a device that efficiently, quickly, and uniformly transfers one or more phases (liquid, solid) into another immiscible continuous phase (usually liquid). When the fineness of one or more materials reaches the micrometer or even nanometer level, the system can be considered homogeneous. When external energy is input, the two materials recombine into a homogeneous phase. The high shear homogenizer, due to the strong kinetic energy brought by the high tangent speed and high-frequency mechanical effect generated by the high-speed rotation of the rotor, makes the materials subject to intense mechanical and hydraulic shearing, centrifugal extrusion, liquid layer friction, impact tear and turbulence in the narrow gap between the stator and rotor, forming suspension (solid/liquid), lotion (liquid/liquid) and foam (gas/liquid). The high shear homogenizer instantly disperses and emulsifies immiscible solid, liquid, and gas phases uniformly and finely under the combined action of corresponding processes and appropriate additives. Through the cyclic operation of the high-frequency pipeline high shear dispersion homogenizer, stable high-quality products are finally obtained.

　　The homogenizer emulsifier has the following main characteristics:

　　1. The pressure control of the homogenizer emulsifier mainly relies on the use of two pole mechanical pressure regulation, which is very convenient to adjust and also very safe and reliable;

　　2. The plunger of the homogenizer emulsifier is mainly made of highly wear-resistant alloys, as well as new processes such as sprayed alloys and ceramics, which have strong corrosion resistance and wear resistance;

　　3. The high-pressure sealing of the plunger of the homogenizer emulsifier mainly uses various forms such as self expanding rings and V-shaped seals, which have a very long service life;

　　4. The transmission of the crankshaft of the homogenizer emulsifier mainly uses a first-order transmission method, which runs very smoothly, with very little power loss and very low noise;

　　5. The main components of the homogenizer emulsifier are made of stainless steel and highly corrosion-resistant alloys, which meet the hygiene requirements of food very well.

AfterSalesService :

• Laboratory emulsifier