Fixed emulsifier cosmetic equipment

Description :

　　The homogenizer emulsifier has the following main characteristics:

　　1. The pressure control of the homogenizer emulsifier mainly relies on the use of two pole mechanical pressure regulation, which is very convenient to adjust and also very safe and reliable;

　　2. The plunger of the homogenizer emulsifier is mainly made of highly wear-resistant alloys, as well as new processes such as sprayed alloys and ceramics, which have strong corrosion resistance and wear resistance;

　　3. The high-pressure sealing of the plunger of the homogenizer emulsifier mainly uses various forms such as self expanding rings and V-shaped seals, which have a very long service life;

　　4. The transmission of the crankshaft of the homogenizer emulsifier mainly uses a first-order transmission method, which runs very smoothly, with very little power loss and very low noise;

　　5. The main components of the homogenizer emulsifier are made of stainless steel and highly corrosion-resistant alloys, which meet the hygiene requirements of food very well.

　　Emulsifier has been favored by a large number of consumers for its very stable performance and mature process. At the same time, it is also one of the widely used production equipment. The working principle of an emulsifier is mainly to efficiently, quickly, and uniformly transfer a phase or even liquids and solids between multiple phases into another immiscible continuous phase. It is usually a device for the liquid process. When the fineness of one or more materials reaches the micrometer or even nanometer level, the system can be considered homogeneous. When external energy is input, the two materials recombine into a homogeneous phase. The high shear homogenizer is mainly due to the very fast running of the rotor, which produces the very high speed of the tangent line and the very high frequency of the mechanical effect, and also brings very strong kinetic energy, so that the materials can be subjected to very strong machinery in the very narrow gap between the stator and the rotor, as well as a variety of comprehensive effects such as hydraulic shear, liquid layer friction, centrifugal extrusion, impact tear and turbulence, gradually forming suspension, lotion and foam. The high shear homogenizer enables the solid, liquid, and gas phases that are immiscible with each other to be instantly and uniformly dispersed and emulsified under the joint action of relatively mature processes and appropriate additives. It also undergoes high-frequency high shear dispersion and emulsification cycles, resulting in highly stable and high-quality products.

　　The ultra-high speed high shear homogenizer emulsifier is a device that efficiently, quickly, and uniformly transfers one or more phases (liquid, solid) into another immiscible continuous phase (usually liquid). When the fineness of one or more materials reaches the micrometer or even nanometer level, the system can be considered homogeneous. When external energy is input, the two materials recombine into a homogeneous phase. The high shear homogenizer, due to the strong kinetic energy brought by the high tangent speed and high-frequency mechanical effect generated by the high-speed rotation of the rotor, makes the materials subject to intense mechanical and hydraulic shearing, centrifugal extrusion, liquid layer friction, impact tear and turbulence in the narrow gap between the stator and rotor, forming suspension (solid/liquid), lotion (liquid/liquid) and foam (gas/liquid). The high shear homogenizer instantly disperses and emulsifies immiscible solid, liquid, and gas phases uniformly and finely under the combined action of corresponding processes and appropriate additives. Through the cyclic operation of the high-frequency pipeline high shear dispersion homogenizer, stable high-quality products are finally obtained.

AfterSalesService :

• Fixed emulsifier