Multi functional reaction kettle PU kettle widely used and durable

Description :

　　The reaction kettle is an indispensable anti-corrosion equipment in the chemical industry. Mechanical collisions, sudden temperature changes, and other factors often cause porcelain detachment, cracks, bubbles, pores, and other damage to the glaze during use. These defects are never allowed in enamel equipment, and once this phenomenon occurs, it must be repaired. The on-site repair agent of Fushilan polymer composite material is a two-component composite material composed of polymer, alloy steel powder or wear-resistant ceramic powder as the substrate, and a curing agent. Compared with ordinary resin based repair agents, polymer composite materials rely on their finer polymer structure, which gives the material stronger adhesion and excellent corrosion resistance. Polymers can even penetrate into metals, forming a tighter polymer composite protective layer. Repair process: surface cleaning → rust removal → anhydrous alcohol cleaning → Fushi Blue coating bottom repair agent → Fushi Blue coating surface repair agent → curing → use.

　　The broad understanding of a reactor is a container that contains physical or chemical reactions. By designing the structure and configuring the parameters of the container, the heating, evaporation, cooling, and low-speed mixing functions required by the process can be achieved.

　　Application scope of stainless steel reaction kettle

　　Stainless steel reaction vessels are widely used as pressure vessels for processes such as reactions, evaporation, synthesis, polymerization, saponification, sulfonation, chlorination, nitration, etc. in chemical, food, coating, hot melt adhesive, silicone, paint, pharmaceutical, and petrochemical production, such as reactors, reaction vessels, decomposition pots, polymerization pots, etc. The reaction pot is mainly composed of four components: an inner tank body, a jacket, a stirring device, and a support seat (insulation structure can be used according to process requirements).

　　The inner tank body is made of stainless steel (SUS304, SUS316L or SUS321) and other materials according to the process requirements. The inner surface is mirror polished and can be cleaned online with CIP and sterilized with SIP, meeting the requirements of hygiene standards.

　　The jacket shall be made of stainless steel (SUS304) or carbon steel (Q235-B) according to the process requirements.

　　Suitable diameter to height ratio design, customized mixing device as needed; The mixing shaft seal adopts a pressure resistant sanitary mechanical seal device to maintain the working pressure inside the tank and prevent unnecessary pollution and material loss caused by material leakage inside the tank.

　　The support type shall be suspended ear type or floor standing leg type according to operational requirements.

AfterSalesService :

• Multi functional reactor