Long service life of Heyuan reactor resin production equipment

Description :

　　The construction principle and characteristics of a reaction kettle: The reaction kettle consists of a pot body, a pot cover, a stirrer, a jacket, a support and transmission device, a shaft seal device, etc. The material and opening can be customized according to the user's process requirements. Heating methods include electric heating, oil heating, gas heating, water heating (or cooling), open flame heating, etc. The jacket forms are divided into jacket type and outer half tube type, and the jacket oil heating type is equipped with a flow guide device. The mixing forms generally include paddle type, anchor type, frame type, screw type, scraping wall type, etc. The high-speed category includes dispersed impeller, turbine, high shear, and thruster types, for customers to choose according to the process. The transmission forms include ordinary motors, explosion-proof motors, electromagnetic speed regulating motors, frequency converters, etc. The reducers include cycloidal pinwheel, worm gear, and planetary infinitely variable speed. The shaft seal includes ordinary water-cooled packing seal, combined PTFE packing seal, and mechanical seal. The discharge forms include ball valves and downward expansion valves.

　　When using a stainless steel reactor, the refrigerant inlet valve must be closed, the remaining refrigerant in the pot and jacket must be drained, and then the material must be input. The mixer should be started, and then the steam valve and electric power supply should be turned on. After reaching the desired temperature, the steam valve and electric power supply should be turned off first. After 2-3 minutes, the mixer should be turned off. After processing is completed, the remaining condensed water in the pot and jacket should be drained, and the sticky material should be washed away as soon as possible with warm water. Then, the inner wall of the container should be thoroughly cleaned with 40 ℃ -50 ℃ alkaline water, and rinsed with clean water. Especially when there is no material (heat absorbing medium) in the stainless steel reactor pot, the steam valve and electric power supply should not be turned on. Pay special attention to the use of steam pressure. Do not exceed the rated work pressure.

　　The broad understanding of a reactor is a container that contains physical or chemical reactions. By designing the structure and configuring the parameters of the container, the heating, evaporation, cooling, and low-speed mixing functions required by the process can be achieved.

AfterSalesService :

• Heyuan Reactor