Jilin Tourism Sightseeing Train Mini World Small Train Steam Turbine Locomotive

Description :

　　Preparation work before starting the train

　　Before starting the train, the surrounding situation should be checked.

　　2. Adjust the outdoor rearview mirror to the desired angle for easy observation of the rear of the vehicle.

　　3. Turn off unnecessary lights and other electrical equipment.

　　4. Check whether the connecting components between the locomotive and the carriage, as well as between carriages, are complete, intact, and firmly reliable, including the tractor, safety chain, and electrical and gas pipeline joints.

　　5. Check the front of the car and each compartment for any oil, gas, or liquid leaks.

　　6. Check whether the oil levels of engine oil, fuel, coolant, power steering oil, brake fluid, etc. are normal.

　　7. Open the cockpit door, enter the cockpit, adjust the position and angle of the driver's seat and rearview mirror, and fasten the seat belt.

　　8. Confirm that the shift control lever is in neutral position.

　　9. Turn the ignition switch clockwise until the power is turned on, and the battery indicator light and oil pressure alarm on the dashboard will light up.

　　10. Continue to turn the ignition switch and start the engine. Do not press the accelerator pedal and request to start at idle speed. After starting for 5-10 seconds, the oil pressure will automatically turn off.

　　11. After starting for 2-3 minutes, press the accelerator pedal and the power indicator light should automatically turn off.

　　12. Slowly press the accelerator pedal until the pressure gauge shows that the pressure in the air storage tank reaches 0.5 MPa or above.

AfterSalesService :

• Sightseeing train