Automatic cleaning machine for cylinder block and cylinder head, ultrasonic cleaning and rust prevention production line

Description :

　　Automatic cleaning machine for cylinder block and cylinder head, ultrasonic cleaning and rust prevention production line

　　The cylinder head automatic cleaning machine and the through type ultrasonic cleaning anti rust production line use chain transmission to transport workpieces, and are novel continuous cleaning equipment with functions such as ultrasonic cleaning and ultrasonic cleaning spray cleaning processes. The workpiece is moved onto the transmission chain from the previous process, and the chain plate is fixed in design. During operation, the workpiece is cleaned and placed on the conveyor chain. It is then sequentially cleaned through the cleaning tank, sprayed during climbing, and passed through the water tank to complete the cleaning and water passing processes. The return liquid is purified and can be reused, and each tank is equipped with a stainless steel mist cover. This machine has the advantages of multiple workstations, comprehensive functions, reasonable structure, easy operation, and good cleaning effect. This is of great significance for cleaning assembly line parts, improving the working environment, enhancing cleaning quality, reducing cleaning costs, and reducing labor intensity.

　　Scope of application:Cleaning of aluminum alloy die-casting parts in the automotive industry, such as automotive engine housings, engine cylinder blocks, engine brackets, clutch housings, automatic transmission valve plates, oil valve accessories, crankcases, filters, starters, generators, air conditioning compressors, brake pumps, foot pedals, wheel hubs, brake shoes, and other aluminum die-casting parts. Batch efficient ultrasonic, spray cleaning, and drying of aluminum alloy die-casting parts for oil, degreasing, and debris removal;

　　Instructions for using ultrasonic cleaning machine:

　　oneInstallation of Ultrasonic Cleaning Machine:

　　Please refer to the installation manual of the ultrasonic cleaning machine to connect the temperature control sensor signal line, ultrasonic drive line, heater control line and other circuits between the electrical control cabinet of the cleaning machine and the host, and connect the 380VAC power supply. Install the water inlet pipe, water outlet pipe and overflow discharge pipe of the cleaning machine.

　　twoUltrasonic cleaning machine with water:

　　Add an appropriate amount of clean water to the cleaning tank, with the liquid level reaching a height that submerges the parts to be cleaned, generally not exceeding three-quarters of the cleaning tank.

　　threeUltrasonic cleaning machine heating:

　　Activate the electric heating switch and point the white scale on the water temperature adjustment knob to the appropriate temperature (around 60 ℃). The temperature of the cleaning machine should not exceed 70 ℃ during use.

　　fourUltrasonic cleaning machine with cleaning agent added:

　　When the water temperature rises to around 40 ℃, add UC-O3 component cleaning agent to the cleaning tank (usually around 5kg at a time), slowly stir the clean water to fully dissolve it (at this time, you can also start the ultrasonic wave or turn on the air blowing device for stirring).

　　fiveUltrasonic cleaning machine pretreatment:

　　Before cleaning, it is advisable to use a bamboo knife to briefly clean the dirt on the surface of the components (such as dust on the outer surface of the dust cover, and thick and easily removable oil sludge on the curved surface of the cylinder block), in order to extend the service life of the cleaning solution.

　　Ultrasonic waves can perform precise cleaning, but their ability to treat mud like pollutants is weak. Therefore, in pre-treatment, efforts should be made to remove yellow or thin mud like pollutants as much as possible.

AfterSalesService :

• Automatic cleaning machine for cylinder block and cylinder head