Ultrasonic cleaning line for hardware parts before electroplating using a water-based ultrasonic cleaning machine

Description :

　　Ultrasonic cleaning line for hardware parts before electroplating using a water-based ultrasonic cleaning machine

　　Through the use of a water-based ultrasonic cleaning machine and a pre electroplating ultrasonic cleaning line for hardware components, efficient product movement is achieved through the use of stainless steel conveyor chains. Combined with spray ultrasonic cleaning, spray cleaning, water passing, air cutting, and drying processes, the hardware components are continuously and efficiently cleaned and dried, greatly improving the electroplating effect.

　　Main parameters:

　　1. Overall dimensions of the machine: customized according to the actual situation of the customer.

　　2. Cleaning solution tank temperature: adjustable within the range of ≤ 100 ℃, and automatically maintains a constant temperature. (In general)

　　3. Oven temperature: adjustable within the range of ≤ 200 ℃ and automatically maintains a constant temperature. (In general)

　　4. Water consumption: 0.5-2.5t/h. (Water can be recycled)

　　5. Detergents used: metal detergent, degreaser, wax remover (in a certain amount and proportion)

　　6. Water quality requirements for use: tap water (soft water), pure water.

　　7. Cleaning efficiency: Customized according to actual conditions, with specific dimensions and parameters also varying accordingly.

　　8. Heating method: one of electricity, gas, steam, or fuel, chosen by the user.

　　1) Structure: The ultrasonic tank body is made of imported SUS304L 2mm stainless steel plate; The bottom of the groove tilts backwards, which is conducive to drainage and slag discharge; There is an independent overflow box located on the upper middle side of the storage tank; The overflow box has a width of 150mm and requires smooth water flow. It can quickly overflow the floating dirt on the surface of the cleaning solution into the storage tank for oil-water separation treatment.

　　2) Cleaning solution flow direction: The cleaning solution overflows from the cleaning tank to the storage tank, and then circulates back from the storage tank, repeating the cycle.

　　3) Ultrasonic waves: using bottom or side vibration ultrasonic waves, with a power of 60W per transducer and an ultrasonic frequency of 28KHZ, which can be fine tuned; Equipped with a scanning circuit to stabilize the ultrasound power in a good state, and equipped with a current magnitude indicator that can be controlled separately. There is no liquid in the tank, and ultrasound should not be turned on to avoid damaging the transducer.

　　4) Circulating filtration: equipped with an independent circulating filtration system, the filtration system consists of stainless steel filtration pump, stainless steel plug filter, pressure gauge, etc., with a filtration accuracy of 10um and adjustable circulating flow rate.

　　5) Adopting a digital automatic temperature controller, the temperature control range is continuously adjustable from 0 to 100 ℃.

　　6) Circulating pump: Adopting Taiwan's "Yuanli" brand lightweight horizontal multi-stage centrifugal stainless steel water pump; The strength of its flow rate and head absorbs suspended grease and dust from the cleaning solution.

　　8) Heating: Each ultrasonic cleaning tank is equipped with a constant temperature heating device. The cleaning tank is wrapped with insulation cotton and automatically temperature controlled. The RT-100 ℃ can be adjusted, and the temperature controller probe is placed inside the cleaning tank.

　　Working fluid: Municipal water cleaning agent

　　9) All internal covers, tanks, pipelines, nozzles, chains, filters, pump bodies, valves, fixture plate fasteners, and fixture plates that come into contact with liquids are made of SUS304 stainless steel plates. The pump adopts a special stainless steel pump from the south.

　　10) Cleaning agents and maintenance chemicals are compatible with metals, plastics, and other structural materials used in manufacturing cleaning facilities (including pumps, filters, controllers, and safety circuits)

　　11) Equipped with reliable circulation filtration, oil-water separation system, etc.

　　12) The electrical control system adopts reliable imported control systems and components.

　　13) There shall be no liquid leakage between each groove.

　　Daily maintenance:

　　1. The equipment uses non flammable cleaning agents and should not use flammable or explosive substances as cleaning agents. When using the equipment, it is necessary to ensure that it is kept away from places with flammable or explosive substances. If the user needs to use certain substances in special circumstances, they must consult our company to confirm safety and take corresponding safety protection measures;

　　2. No liquid or insufficient liquid level in the cleaning tank can cause irreversible damage to the equipment. When using, it is necessary to ensure that a sufficient amount of cleaning liquid is injected into the tank, otherwise related electric heaters, pumps, and ultrasonic transducers may be damaged and may cause fire and personal injury;

　　3. Be careful not to splash water into the electrical control box and related electrical components, and keep them away from water vapor, corrosive gases, dust, etc;

　　4. When the equipment is abnormal, please contact our company in a timely manner or have an experienced electrician inspect it after stopping the power supply.

　　9 major guarantees for Xiantai cleaning machine:

　　1. Guarantee: The brand and manufacturer of the products sold guarantee quality confidence;

　　2. Data Protection: The dimensions of the products sold are manually measured by personnel, and we guarantee that the error is reduced within 1-3CM. Please feel free to purchase with confidence;

　　3. Delivery guarantee: Orders that have been successfully paid under normal circumstances will be shipped within 3-5 days; (Excluding large customized equipment).

　　4. Quality assurance: All products undergo three quality inspection checkpoints during the production process, including inbound, outbound, and outbound, striving to ensure that there are no quality issues;

　　5. Physical guarantee: We emphasize our commitment to providing image language descriptions that match the physical attributes of all products;

　　6. Photography guarantee: All product images are taken truthfully and effectively, reducing color difference. The purchase is subject to the actual product;

　　7. Service guarantee: Working hours: 8:00 (am) -18 (pm), normal orders and shipments on Saturdays and Sundays;

AfterSalesService :

• Through type water washing ultrasonic cleaning machine