Engine parts high-pressure spray cleaning line, compressor parts cleaning and drying machine

Description :

　　Engine parts high-pressure spray cleaning line, compressor parts cleaning and drying machine

　　The high-pressure spray cleaning line for engine parts and the cleaning and drying machine for compressor accessories are fully enclosed, and the entire line adopts an assembled frame design. The main and auxiliary tanks, pipelines, valves, pumps, spray channel inner walls, and mesh belts are all made of stainless steel materials that are resistant to corresponding corrosive media; The spray pump adopts stainless steel pump; The spray room is equipped with an openable observation window. Convenient for users to observe the operation of the production line and parts, equipped with reserved maintenance doors on the non operating side for easy repair and maintenance. And there is a main exhaust outlet set at the top of the entire enclosed room, which collects all the exhaust gas, water vapor, etc. in the channel into the main air duct for centralized treatment and discharge. This not only keeps the production line clean and reasonable, but also prevents secondary pollution of workpieces by workshop dust, making full use of the site. The entire production line has undergone unique treatments in pipeline design, electrical control, selection of raw materials and components, and strives to create a clean, pollution-free, efficient, and high-quality cleaning working environment for your company.

　　Engine parts high-pressure spray cleaning line, compressor parts cleaning, dryer cleaning process:

　　Feed → High pressure spray cleaning → Air cutting dehydration → Hot water spray rinsing → Air cutting dehydration → Clear water spray rinsing → Air cutting dehydration → Air cutting dehydration → Drying → Discharge

　　Cleaning cycle: continuous transmission of tracks, transmission speed of 005-3m/min;

　　The equipment should have the following functions:

　　① High pressure spray (adjustable pressure); ② High pressure fan quickly cuts off water; ③ Automatic temperature control (adjustable from 0 to 100 ℃); ④ Oil water separation devices, etc;

　　Engine parts high-pressure spray cleaning line, compressor parts cleaning and drying machine features:

　　1. The inner cylinder adopts a stainless steel structure, which is beautiful and durable, and the tank body has no leakage;

　　2. Strong high-pressure spray, capable of meeting high-quality cleaning standards;

　　3. Protection system: A protection system is installed in the control system, equipped with leakage protection, overload protection, etc;

　　4. Set up a constant temperature system to ensure that the entire machine operates at a constant temperature, and insulation materials are applied around the tank.

　　5. Set up a split type electrical control cabinet that is aesthetically pleasing, easy to operate and maintain, with Schneider electrical components used;

　　6. The control system adopts Mitsubishi PLC fully automatic control from Japan;

　　7. Humanized design of the control system, with emergency stop devices installed in multiple parts of the equipment, ensuring safety and reliability;

　　8. The track operation is driven by a motor, and the running speed is continuously adjustable;

　　9. Adopting a closed high-pressure water cutting method, the cleaning effect is good;

　　10. The cleaning machine adopts a closed structure, with an observation window on the sealed upper part and a hidden air exhaust device on the top;

　　11. The whole machine is made of high-quality materials, and all important components are branded (such as Schneider contactors to ensure the quality and stable performance of the whole machine, and to work continuously for 24 hours/day without any faults);

　　12. Working environment: Temperature: 5 ℃± 40 ℃ Humidity: 45 ± 95% RH

　　13. Power supply: AC380V ± 5%, 50HZ (three-phase five wire system).

AfterSalesService :

• High pressure spray cleaning line for engine parts