Guangzhou mask laminating machine manufacturer

Description :

　　The finished mask body produced by the mask laminating machine is not a final consumer product, but only a semi-finished product that needs further processing to meet people's daily needs. Therefore, the mask body machine is only the starting point of the related mask production process; It is commonly used in the production of inner ear masks, outer ear masks, and strap on masks. For example, the production of strap on masks involves placing the finished mask body on a machine conveyor, wrapping it with a pull tube, and then pressing and welding it with an ultrasonic flower wheel to cut off the strap and output the finished product. Only one person needs to place the mask body on the conveyor belt of the machine, and the rest of the subsequent work is fully automated. The production process of the strap mask machine is as follows: feeding the mask body sheet - welding the strap - cutting the strap. The production process of other masks, such as those with outer ear bands and inner ear bands, is roughly the same as above.

　　The non-woven mask molding machine and mask laminating machine are advanced equipment newly designed according to the needs of domestic and foreign markets. This machine consists of several parts, including a feeding system, a folding forming system, an ultrasonic thermal whole system, a main power system, an aluminum sheet automatic feeding system, and an automatic counting system. It has the advantages of continuously adjustable production speed, high production efficiency, good product stability, convenient and accurate counting, high raw material utilization, simple operation and adjustment, and few operators.

　　According to the basic principles of ultrasonic welding and automatic edge wrapping, this machine is mainly used for welding and cutting the edges of cup-shaped masks. The mask laminating machine adopts PLC control system software and touch screen settings. Practical operation is simple, convenient, and fast. Can be used alone or separately. It only requires workers to load and load materials. It can save a lot of labor. It can be produced using automation technology. 1-4 layers of polypropylene spunbond nonwoven activated carbon and its filtration system can be applied.

　　Due to the limited number of systems included, the semi-automatic mask cutting machine only has an ultrasonic welding system at its core. So this type of equipment is relatively much simpler in daily maintenance, especially suitable for mask factories with smaller scale and weaker capital strength to choose and use.

AfterSalesService :

• Guangzhou mask laminating machine manufacturer