Shaoguan Ultrasonic Welding Machine Maintenance Split type Ultrasonic Plastic Welding Machine

Description :

　　Ultrasonic welding machine spot welding method:

　　A、 Welding two pieces of plastic at different points does not require pre designed welding lines to achieve the purpose of welding.

　　B、 For larger workpieces that are difficult to design welding lines, spot welding can be performed at multiple points simultaneously to achieve fusion effect. Cutting and sealing: Using the principle of ultrasonic instantaneous vibration, cutting synthetic fabrics has the advantages of smooth and non cracking incisions and no wire drawing.

　　Ultrasonic welding machine: With the propagation of the welding head and appropriate pressure, metal parts (such as nuts, screws, etc.) are instantly squeezed into the reserved plastic holes and fixed at a certain depth. After completion, the strength can be comparable to that of traditional molds in terms of tension and torque, avoiding the disadvantages of damage to the injection mold and slow injection.

　　Ultrasonic welding machine forming: This method is similar to the riveting method, in which a concave welding head is pressed against the outer ring of a plastic product. After the welding head emits ultrasonic ultra-high frequency vibration, the plastic is melted and formed to be wrapped around a metal object for fixation, and the appearance is smooth and beautiful. This method is mostly used for fixing and forming electronic products, speakers, and lens fixation in cosmetics.

　　Ultrasonic welding machine welding principle: It converts 50/60 Hz current into 15, 20, 30 or 40 KHz electrical energy through an ultrasonic generator. The converted high-frequency electrical energy is converted back into mechanical motion of the same frequency through a transducer, and then the mechanical motion is transmitted to the welding head through a set of amplitude changing rod devices. The welding head transfers the received vibration energy to the joint of the workpiece to be welded, where the vibration energy is converted into heat energy through friction, melting the plastic. Ultrasonic waves can not only be used for welding hard thermoplastic plastics, but also for processing fabrics and films. The main components of an ultrasonic welding system include an ultrasonic generator, a transducer amplitude rod/welding head triple group, a mold, and a frame.

　　Ultrasonic welding machine welding method: Under moderate pressure, the welding head with ultrasonic ultra-high frequency vibration generates frictional heat on the joint surface of two plastic pieces, instantly melting and joining. The welding strength is comparable to the body. By using suitable workpieces and reasonable interface design, it can achieve water tightness and air tightness, and eliminate the inconvenience caused by the use of products, achieving efficient and clean welding.

　　Ultrasonic welding machine riveting method: The ultrasonic high-frequency vibration welding head is pressed against the protruding tip of the plastic product, causing it to instantly heat up and melt into the shape of a rivet, mechanically riveting different materials together.

　　Fully automated ultrasonic welding machine: It is a large-scale ultrasonic welding equipment tailored to different products. The machine has a fully automated operation mode and can perform multi-point welding, as well as large-scale welding, fusion welding, bonding and other processes in one go.

　　Fully automated ultrasonic welding machine: suitable for a wide range of product applications, such as car rain traps, car operation consoles, car wheel hub covers, car mudguards, mudguards, protective covers, car decorative strips, car anti scratch strips, car mudguards, car coat racks, car rear door panels, car gear shift covers, water treatment equipment components, PE board and plastic film welding, car bumpers, car sunshades, car license plates, car dashboards, car door panels, car storage boxes, etc.

　　Fully automated ultrasonic welding machine: This equipment adopts a PLC programmable microcomputer control system, with a human-machine interface window to adjust welding parameters, which is simple, convenient, safe, and error free. The rack is welded with high-quality stainless steel square tube δ 5x100x50mm, making the whole machine stable and highly reliable.

　　Ultrasonic welding machine can weld materials such as ABS, PC, polypropylene nitrile, polyester resin, styrene acrylic, polyethylene oxide, polysulfone, polystyrene PS, polypropylene PP, polyethylene PE, polycarbonate PC, nylon, polyphenylene oxide, acrylic and PVC alloys, ABS and P.C composites, cellulose, acrylic, aldehyde resin (plastic steel), and acrylonitrile butadiene styrene SBS.

　　Ultrasonic welding machine: This machine is suitable for product applications such as felt filters, dust filters, anti-virus filters, filter cotton, grid filters, plastic filters, air purification filters, carbon cloth filters, air conditioning filters, electric mosquito repellent boxes, air purifiers, purifier filters, ping-pong rackets, plastic rackets, badminton rackets, mask filter boxes, mask filter cotton welding and cutting, hot compress eye masks, bamboo charcoal clothing racks, large oil drum covers, filters, humidifiers, air purifiers, incubators, toner cartridges, ink cartridges, car taillights, car fog lights, motorcycle lights, reflectors, emergency parking tripods, highway indicator lights, road standards, electric mosquito swatters, flexible rackets, sports equipment, etc.

　　Ultrasonic welding machine: With its advantages of speed, cleanliness, safety, etc., it is an advanced process for welding plastic itself. All plastic workpieces injected into rows can be welded using ultrasonic plastic fusion welding machine; Thus avoiding the inconvenience caused by the use of adhesives and other methods.

AfterSalesService :

• Maintenance of Ultrasonic Welding Machine in Shaoguan City