Submersible sand pump/vertical submersible slurry pump/high-power submersible cement sand pump

Description :

　　Submersible sand pump/vertical submersible slurry pump/high-power submersible cement sand pump are pump products produced by our company, mainly used for transporting ore tailings, tailings and tailings. It has the characteristics of high efficiency, wear resistance, no blockage, and the passage of large particles. Sedimented mortar, ore, mineral, slag, etc. can be stirred vigorously with a mixing head to form a slurry and pumped simultaneously. Provide a convenient method for cleaning sediment.

　　Application conditions for submersible sand pump/vertical submersible slurry pump/high-power submersible cement sand pump:

　　1. The power supply is 50Hz or 60Hz/230V/380V/415V/660V/1440V. The capacity of a three-phase AC power supply is 2-3 times the rated capacity of the motor.

　　2. The temperature of the medium shall not exceed 50 ° C, and the R-type shall not exceed 120 ° C (not exceeding 140 ° C), and it shall not contain flammable and explosive gases.

　　3. The weight concentration of solid particles in the medium is 45% ash and 60% slag.

　　4. Diving depth for passengers: not exceeding 40 meters, the small diving depth depends on the diving motor.

　　The working position of the unit in the medium is vertical, with the upper part suspended and positioned.

　　Precautions for using submersible sand pumps/vertical submersible slurry pumps/high-power submersible cement sand pumps:

　　Operate and use according to the conditions provided in the product manual. Due to the risk of leakage in submersible pump products, special attention should be paid to the basic requirements for safe use:

　　1. Do not forcefully pull the cable out of the pump.

　　2. The power cord must have a leakage protection device.

　　3. The power must be cut off during installation or maintenance.

　　4. Do not run without water for a long time.

　　In addition, submersible sand pumps should be used reasonably according to the technical parameters of the product (flow rate and head) to extend the service life of the product. If you work and flow for a long time under non rated water head, it is easy to burn out the submersible motor.

　　Submersible sand pumps/vertical submersible slurry pumps/high-power submersible cement sand pumps are widely used:

　　1. Drainage, rivers, lakes, reservoirs, and ports.

　　2. Sedimentation in rivers, lakes, and oceans.

　　3. Reclamation of land in coastal areas.

　　4. Sludge and mud discharge during the project construction process.

　　5. Remove sediment from municipal pipelines and rainwater pumping stations.

　　6. Cleaning of sedimentation tanks in steel plants, beneficiation plants, power plant water tanks, coal tanks, and oxidation ditch sedimentation tanks in sewage treatment plants.

　　7. Transportation of blast furnace slag and slag in steel plants.

　　8. Transport tailings, slag, and slurry from the beneficiation plant.

　　9. Remove coal slag, coal slurry, and coal slurry.

　　10. Transportation of fly ash, coal slurry, and coal slurry in power plants.

　　11. Absorb various solid particles of corundum, quartz sand, and steel slag.

　　12. Mineral processing, gold mining, iron sand.

　　13. Transport slurry containing various impurities.

　　14. Transport other media containing larger solid particles.

　　Features:

　　The operating efficiency of the slurry pump is very high with minimal losses.

　　Secondly, the overcurrent components of the pump have a relatively long service life, saving production costs.

　　Thirdly, the entire industrial and mining system operates stably and will not be affected by pump operation issues.

　　Maintenance methods for submersible sand pumps/vertical submersible slurry pumps/high-power submersible cement sand pumps:

　　Users should perform maintenance according to the requirements of the product manual. When encountering maintenance problems, they should be solved by personnel with technical and relevant knowledge. Especially after using the product for a period of time, it should be checked whether the electrical insulation meets the requirements. If maintenance or use is improper, and insulation resistance is found to be low, cables are damaged, or the machine is corroded and difficult to operate, and the starting current increases, timely repair or maintenance should be carried out to prevent safety accidents or further damage to the machine.

　　Friendly reminder: Please identify the manufacturer and do not be deceived and cause unnecessary economic losses.

　　During the warranty period; Under the condition that the conveying medium meets the requirements of the pump's overcurrent components and can comply with the user manual, if the product is damaged or cannot work properly due to manufacturing defects, our factory will replace or repair it free of charge, and vulnerable parts are not included in this period. One year warranty/wooden box packaging, available or customizable. For more details, please call us for consultation!

AfterSalesService :

• Submersible sand pump