Haichen supplies two-component polyurethane sealant for joint filling. Performance parameters of two-component polyurethane sealant for polyurethane building sealant
Category:
building materials/Building adhesives/Other building adhesives
Model:
01
Brand:
Hengshui Haichen New Material Technology Co., Ltd
model:
01
appearance:
Paste paste
solidification conditions:
high-temperature curing
viscosity:
eighty
solid content:
sixty
shear strength:
fifty
relative density:
one point six
Initial dry time:
less than 2
curing time:
Less than 12
Minimum film-forming temperature:
≤3mm
Scope of application:
-40-50
density:
one point six
Film formation time:
two
Tensile adhesion:
a) 0.6-8
elongation:
0.6-8
manufacturer:
Hengshui, Hebei
Retail Price
240.00USD
重量
kg
- Product Description
-
model 01
appearance Paste paste
solidification conditions high-temperature curing
viscosity eighty
solid content sixty
shear strength fifty
relative density one point six
Initial dry time less than 2
curing time Less than 12
Minimum film-forming temperature ≤3mm
Scope of application -40-50
density one point six
Film formation time two
Tensile adhesion a) 0.6-8
elongation 0.6-8
manufacturer Hengshui, Hebei
Description :
Product Name: Two component polyurethane sealant
Product: Hengshui Haichen
Product specification: 25kg/box
Product material: two-component polyurethane sealant
Product Introduction: Two component polyurethane sealant is a base paste made from liquid polyurethane rubber as the main agent, supplemented with reinforcing agents, toughening agents, thickening agents, thixotropic agents, and other additives; A sulfurized paste is prepared by mixing metal oxides and other components, which can be cured into an elastic sealing material.
Two component polyurethane sealant is a type B building polyurethane sealant that has self-adhesive properties with concrete and is cured at room temperature using liquid polyurethane rubber as the base material. It has the ability to seal joints and prevent water leakage.
Two component polysulfide sealant Shenyang AB polyurethane sealant for building waterproofing
l、 Adhesive properties: Polysulfide sealant has good adhesion to cement, steel, glass, wood, natural stone, etc. Low modulus and high elongation polysulfide sealant should be used in general construction and water conservancy projects, with a bonding strength of ≥ 0.2Mpa and elongation of ≥ 300%.
2. Water resistance: Polysulfide sealant has a stable effect on seawater, tap water, and distilled water, and has the smallest weight change on seawater (containing salt).
3. Acid and alkali resistance: Polysulfide sealant is not resistant to concentrated acids and alkalis. But it is still stable to dilute, alkaline, and various salts.
4. Heat aging resistance: Polysulfide sealant has excellent heat aging resistance and can work for a long time under conditions of 40 ℃ to 120 ℃.
5. Good radiation resistance: The polysulfide sealant has excellent resistance to X-rays.
6. Sexuality: Although liquid polysulfide sealant has a slight odor, it is gradually adsorbed by the filler after curing. The produced polysulfide sealant has been tested by the Institute of Environmental and Health Engineering of China Preventive Medicine for its L and D50 values; 20g／kg。
AfterSalesService :
Key words:- Two component polyurethane sealant
More Products
