Chongqing self-adhesive steel plate putty waterstop strip coil putty waterstop strip Haichen 300 * 6 butyl rubber steel plate putty waterstop strip manufacturer

Description :

　　1、 Common name for self-adhesive steel plate putty waterstop:

　　Self adhesive steel plate putty waterstop, also known as butyl self-adhesive steel plate putty waterstop, steel plate putty rubber waterstop, butyl steel plate waterstop, butyl rubber steel plate putty waterstop, is a new product produced by our company Self adhesive steel plate putty waterstop is a new type of joint waterproofing and waterstop product made by mixing and extruding rubber and bonding it with galvanized steel plate.

　　2、 The main characteristics of self-adhesive steel plate putty waterstop are:

　　1. The self-adhesive steel plate putty waterstop is mainly made of rubber putty, which has excellent aging resistance and is very self-adhesive;

　　2. It does not flow during high temperatures in summer. Not brittle at low temperatures in winter;

　　3. Self adhesive steel plate putty waterstop with water resistance, acid and alkali resistance, and aging resistance;

　　4. A 0.4 or 0.6mm steel plate is installed in the middle of the self-adhesive steel plate putty waterstop. Therefore, it provides reliable waterproof and anti-seepage functions between the building joints of self-adhesive steel plate putty waterstop.

　　3、 Construction method of self-adhesive steel plate putty waterstop:

　　A、 Overlap the self-adhesive steel plate putty waterstop expansion putty connection by 100mm, press it tightly by hand to eliminate air and firmly bond it to itself, and reinforce the rolled wire before reapplying the protective film.

　　B、 Place the self-adhesive steel plate putty waterstop in the middle of the wall and fix it to the steel reinforcement with wire. The waterstop should be slightly higher than the concrete interface.

　　C、 Before pouring again, remove the protective film at the lower end of the rubber waterstop, pour concrete to 1/21/3 of the width of the self-adhesive steel plate putty waterstop, remove the protective film at the upper end before pouring again. When using self-adhesive steel plate putty waterstop, the adhesion between the steel plates on both sides and the surrounding concrete structure is strong, and the steel plates are firmly bonded to the rubber.

　　D、 When the structure deforms, only the rubber part elongates and becomes thinner, and there will be no new leakage gaps between the steel plate and concrete, or between the steel plate and rubber. Therefore, the use of steel plate rubber waterstop enhances the anti-seepage performance during structural deformation and plays an important role in the anti-seepage and waterstop of the entire project.

　　4、 Attention to the use of self-adhesive steel plate putty waterstop:

　　1. Self adhesive steel plate putty waterstop prevents mechanical and steel bar damage during transportation and construction.

　　2. When installing steel self-adhesive steel plate putty waterstop, fix it in the correct position in the concrete to avoid displacement during concrete pouring.

　　3. Prohibit steel plate putty rubber waterstop from being exposed to sunlight for a long time in the open air, while preventing rain and avoiding contact with highly polluting chemicals. The storage location for steel plate putty rubber waterstop should be maintained at -10~+30 ℃, with a relative humidity of 40~80%.

AfterSalesService :

• Self adhesive steel plate putty waterstop