Sichuan Butyl Putty Rubber Steel Plate Waterstop, Steel Plate Putty Waterstop, Haichen 300 * 6 Butyl Rubber Steel Plate Putty Waterstop Manufacturer

Description :

　　In box foundations or basements, the concrete for the bottom and exterior walls is poured and compacted separately. The next time the concrete for the wall panels is poured and compacted, there will be a construction cold joint. When this joint is located below the groundwater level, it is easy to cause water seepage. This requires technical treatment of this seam, and there are many methods for treatment, among which the most common method is to install butyl rubber steel plate putty waterstop.

　　1. Efforts should be made to place the waterproof steel plate on the centerline of the wall;

　　2. The welding between two steel plates should be full and double-sided, with a minimum overlap of 20mm between the plates;

　　3. The treatment at the corner of the wall includes bending the entire steel plate; 2、 T-shaped welding; 3、 7-shaped welding.

　　4. The support welding of butyl rubber steel plate putty waterstop can be welded onto the main reinforcement with small steel bars;

　　5. When the butyl rubber steel plate putty waterstop passes through the column hoop reinforcement, the hoop reinforcement can be disconnected and made into an open hoop, which is welded onto the steel plate.

　　6. The "opening" of the butyl rubber steel plate putty waterstop is facing the upstream surface.

　　Overlap the connection of the butyl rubber steel plate putty waterstop by 100mm, press it tightly by hand to eliminate air and firmly bond it to itself, and reinforce the rolled wire before reapplying the protective film. The steel plate putty rubber waterstop is placed in the middle of the wall and fixed to the steel bars with wire. The waterstop is slightly higher than the concrete interface. Before the second pouring, remove the protective film at the lower end of the butyl rubber steel plate putty waterstop, pour concrete to 1/21/3 of the width of the steel plate putty rubber waterstop, remove the upper protective film before the second pouring, and then pour again.

　　Characteristics of butyl rubber steel plate putty waterstop:

　　Butyl rubber steel plate putty waterstop is a waterstop product composed of high-performance polymer material and galvanized sheet composite. The main material of rubber putty is a rubber material with excellent aging resistance and strong self adhesiveness; High temperatures in summer do not flow. Not brittle at low temperatures in winter; And it has excellent water resistance, acid and alkali resistance, and aging resistance; Long service life, product itself, and good environment. To withstand certain bending and pressure. There are 0.4 or 0.6mm steel plates in the middle. Butyl rubber steel plate putty waterstop provides reliable waterproof and anti-seepage functions between building joints. The series of steel plate putty waterstop products includes various specifications and models, and can produce various types of steel plate putty waterstop according to user requirements to meet the actual needs of engineering.

　　Manufacturer of butyl rubber steel plate putty waterstop, wholesale of steel plate putty waterstop. Our main products include: pot type rubber bearings, ball bearings, plate type rubber bearings, bridge expansion devices, rubber waterstop, waterproof sealant series products, and more than 1000 varieties for highways and railways. The company has departments including production, technology, quality inspection, sales, finance, and office. The production workshop includes casting workshop, machining workshop, rubber mixing workshop, vulcanization workshop, punching and shearing workshop, and expansion device workshop.

AfterSalesService :

• Butyl putty rubber steel plate waterstop