Forged steel valve Oubei valve Internal thread gate valve Z11H-16C DN50 Forged steel high-temperature valve manufacturer

Description :

　　1. Product Overview

　　gate valveZ11H internal threadIt can be used on ring network pipelines where the medium flows in both directions, which means that the flow direction of the medium is not restricted. When fully open, the sealing surface is less susceptible to erosion by the working medium than the globe valve. It is a type of gate valve that is suitable for media such as water, steam, oil, etc. It has low fluid resistance and requires less torque for opening and closingThe physical structure is relatively simple, the manufacturing process is good, and the structural length is relatively short.

　　2. Standard technical parameters

　　3. Characteristics of forged steel valves

　　 The forging process can eliminate casting defects such as sand holes and porosity that occur during the smelting process of metals. The forging process can optimize the microstructure of metals and preserve the flow lines of the metal structure intact. Especially in terms of physical and mechanical properties, such as tensile strength, yield strength, hardness, etc., it is significantly better than cast steel valves.

　　 Produced by Red Zebra Valve Technologygate valveZ11H internally threaded forged steel valveUsing forging technology, the valve diameter is DN15-DN50, which can meet the operating temperature of 550 degrees Celsius. There are both American and Chinese standard versions available, and customization is also supported according to your needs. Welcome to consult.

　　fourCompany live shot

AfterSalesService :

• gate valve