Pulse filter cartridge dust collector, filter cartridge dust collector, filter cartridge dust collector manufacturer, non-standard customization

Description :

　　Product Introduction of Pulse Filter Cartridge Dust Collector:

　　Welding smoke and exhaust gas purification filter cartridge dust collector is a dust collector composed of filter cartridges as filtering elements or using pulse blowing; It mainly consists of the following main structures: modular frame structure, wind turbine power unit, pulse blowback structure unit, filter cartridge filtering structure unit, dust collection structure unit, etc., and its various components; Mainly used in working conditions with high smoke and high emission requirements. The filter cartridge dust collector is an efficient and energy-saving dust purification equipment. The combination filter cartridge dust collector not only has the characteristics of strong dust cleaning ability, high dust removal efficiency, and low emission concentration of the jet pulse dust collector, but also has the characteristics of stability, reliability, low energy consumption, and small footprint, especially suitable for processing high air volume flue gas. Widely used in industries such as mechanical processing, chemical production, powder recycling, construction manufacturing, pharmaceutical production, food company production, furniture production, and hardware and electronic processing for dust removal. The combined filter cartridge dust collector is composed of multiple independent chambers, and each chamber is cleaned in sequence without interfering with each other, achieving long-term continuous operation.

　　Technical parameters of pulse filter cartridge dust collector:

　　1. The box and ash hopper are locked and leveled by positioning bolts, and welded on site without air leakage.

　　2. There shall be no air leakage between the pulse valve and the connecting pipe.

　　3. First, open the side cover plate for installing the filter cartridge, remove the spray pipe, hold the upper opening of the filter cartridge with your hand, and fix the filter cartridge into the filter chamber through the frame; Then tightly fit the filter cartridge into the flower plate hole, tighten the bottom fixing bolt, and make the filter cartridge tightly fasten to the flower plate; Recheck the sealing between the cylinder mouth and the flower plate hole; Install the spray pipe, adjust the spray pipe to align the spray hole with the center of the filter bag opening, fix the nut on the spray pipe, and cover the cover plate.

　　Product features of pulse filter cartridge dust collector:

　　1. The pulse filter cartridge dust collector has a reasonable structure, simple maintenance and repair, and low cost; Replacing the filter cartridge is convenient and quick, without the need for any tools;

　　2. Equipment energy-saving, operating resistance of 500-800pa, initial resistance below 200pa, resistance of 1500pa;

　　3. Adopting imported PLC control for adjustable pulse blowback, equipped with imported pressure difference display instrument;

　　4. Series connected horizontally placed filter cartridges, with a single cover to ensure safe operation and easy maintenance of the equipment;

　　5. Ash discharge methods such as ash buckets, ash trucks, and spiral discharge devices can be selected;

　　6. Flexible and versatile box type combination unit modules can meet different on-site installation conditions;

　　7. Multiple filter cartridge materials are available for users to choose from, including high-temperature resistant, moisture-proof, flame-retardant, and more.

　　Application areas of pulse filter cartridge dust collector:

　　1. Regularly check whether the compressed air system is operating normally, whether the air source pressure is stable, and whether it meets the requirements (0.3-0.4 kg).

　　2. Observe the emission concentration of smoke and dust at any time. If dust is found, check the damage of the filter cartridge and the sealing of the filter chamber in a timely manner, block the air leakage pores, and update the filter cartridge.

　　3. Before stopping the dust collector, the filter cartridge should be cleaned once to remove the accumulated dust on the filter cartridge. Adopting a vertical or inclined insertion filter cartridge structure for easy dust adsorption and cleaning; Moreover, due to the minimal shaking of the filter material during dust cleaning, the lifespan of the filter cartridge filter material is significantly longer than that of the filter bag, resulting in lower maintenance costs.

AfterSalesService :

• Pulse filter cartridge dust collector