HaiTe Filter Chemical Cooling Water Fully Automatic Filter Self Cleaning Filter Manufacturer

Description :

Chemical cooling water automatic filterWorking principle:

Fully automatic mechanical filter, self-cleaning filter, circulating water treatment, high quality, low price, lifetime warranty. After entering the filter, the water first passes through the coarse filter and then enters the fine filter chamber, where the dirt (as small as 2 μ m) is intercepted by the fine filter, and the effluent is purified water. Dirt accumulates on the fine filter screen, creating a pressure difference between the inner and outer surfaces of the filter. When the pressure difference reaches the preset value (such as 0.5kgcm2), the self-cleaning cycle is initiated. The differential pressure sensor sends a signal to the controller to trigger the opening of the flushing valve, so that the pressure inside the hydraulic motor chamber, the dirt collector, and the suction nozzle is reduced to communicate with the atmosphere. The pressure difference between the inner surface of the fine filter (sewage) and the outer surface of the fine filter (clean water) that causes the suction nozzle to move relative to each other. The strong suction force of the backwash water cleans the dirt on the filter relative to the suction nozzle and discharges it through the flushing valve. When the backwash water passes through the hydraulic motor, it drives the dirt collector to rotate, so that the suction nozzle can suck up and clean the dirt on the entire filter screen. When the filter screen is washed clean, the controller closes the flushing valve and the equipment automatically returns to the fully filtered state.

Product features of fully automatic chemical cooling water filter:

Self cleaning filters are widely used equipment in the water treatment industry, and their simple design and good performance enable sewage to achieve filtration effects. The main components include: motor, electric control box, control pipeline, main pipe component, filter element component, 316L stainless steel brush, frame component, transmission shaft, inlet and outlet connecting flanges, etc. Self cleaning filters overcome many disadvantages of traditional filtration products, such as small pollutant holding capacity, susceptibility to blockage by pollutants, need to disassemble and clean the filtering part, and inability to monitor the filter status. They have the function of filtering raw water and automatically cleaning and discharging the filter element. During cleaning and discharging, the system provides uninterrupted water supply, which can monitor the working status of the filter and has a high degree of automation. Covering various filtration precision requirements from 10um to 3000um.

Technical parameters of fully automatic chemical cooling water filter:

Single processing capacity: 45-2350m3/h

Work pressure: 0.6Mpa/1.0Mpa/1.6Mpa/2.5Mpa

Working water temperature: 95 ° C

Filtering accuracy range: ≥ 50 μ m

Water required for self-cleaning:<1%

Self cleaning time: 10-60 seconds

Self cleaning control mode: pressure difference, time, and manual

Electric control mode: AC three-phase 380V/50Hz

Control interface: digital display, knob, switch

Filter type: 316L woven mesh, wedge-shaped mesh

Application areas of fully automatic filters for chemical cooling water:

Steel: used for water treatment filtration in raw material yards, sintering pellet plants, cooling water filtration in blast furnaces, rolling mills, continuous casting machines and other systems, and impurity filtration in high-pressure water phosphorus removal systems

Automobiles: Painting production lines are widely used in the manufacturing of water and treatment systems for automobiles, tractors, motorcycles, and engines

Power plant: used for precision pretreatment of high-purity water preparation for power plant boilers, filtration of generator cooling water and sealing water, and can be used as a side filter treatment when the water consumption of the 13-4 series is extremely large

Chemical industry: In the circulating water plant, side filtration treatment can be carried out, and single machine or multi machine parallel main treatment can be used to replace filter media filtration, reduce filter media filtration load, avoid a large amount of flushing water consumption, and save costs

Agricultural landscaping and paper mills: In systems with nozzles and nozzles, it is necessary to reduce equipment blockage and wear caused by impurities. Therefore, high-precision and highly automated filtration product machinery should be selected

Mining: Filter the underground sprinkler water to ensure the normal operation of the system.

Other: Automatic and precise filtering of the system to prevent blockage of the cooling water system

AfterSalesService :

• Haide filter