Haite Filter Hydraulic System High Pressure Pipeline Filter ZU-H100x30
Category:
mechanical equipment/Separation equipment/filter
Model:
ZU-H100x30
Brand:
Haide filter
model:
ZU-H100x30
Filter material replacement method:
replaceable
connection method:
threaded connection
nominal diameter:
15-53
filtration accuracy:
1-30um
gasket:
rubber seal
environmental conditions:
On the pressure pipeline of the hydraulic system
Filter element material:
fiberglass
Processing & Customization:
yes
Filter material type:
fiber
style:
vertical
Effective filtration area:
2.5㎡
performance:
high-efficiency filtration
principle:
Condensation method
purpose:
Oil impurity removal
Applicable subjects:
lubricating oil
weight:
3.6-52
Retail Price
95.00USD
重量
kg
- Product Description
-
model ZU-H100x30
Filter material replacement method replaceable
connection method threaded connection
nominal diameter 15-53
filtration accuracy 1-30um
gasket rubber seal
environmental conditions On the pressure pipeline of the hydraulic system
Filter element material fiberglass
Processing & Customization yes
Filter material type fiber
style vertical
Effective filtration area 2.5㎡
performance high-efficiency filtration
principle Condensation method
purpose Oil impurity removal
Applicable subjects lubricating oil
weight 3.6-52
Description :
Haite Filter Hydraulic System【High pressure pipeline filter】 ZU-H100x30
High pressure pipeline filter product details:
High pressure pipeline filterLocated on the outlet pipeline of the pump, it has the function of protecting pollutants from entering the system. Therefore, the concentration of pollutants in the system can be controlled. Because it is a high-pressure main pipeline that is subject to pump pulsation and pressure impact, the material and strength of the filter element need to be carefully considered.
Working principle of high-pressure pipeline filter:
High pressure pipeline filterThere is a differential pressure transmitter installed, which sends a switch signal when the filter element is contaminated and blocked to a pressure difference of 0.35MPa between the inlet and outlet. At this time, the filter element should be cleaned or replaced to ensure system safety. The filter is also equipped with a bypass check valve. When the filter element is contaminated and blocked to a pressure difference of 0.4 MPa, or other reasons cause the pressure difference between the inlet and outlet of the filter to be too large, the bypass valve can automatically open to ensure the system. When cleaning or replacing the filter element, in order to prevent the system oil from flowing back and prevent the loss of oil in the pressure pipeline, avoid air and pollutants from entering the system, and also allow the oil to flow in a reverse non filtered direction, with a reverse flow rate of one fourth of the nominal flow rate.
Product features of high-pressure pipeline filter:
High pressure pipeline filterInstalled on the pressure pipeline of the hydraulic system, it is used to filter out mechanical impurities mixed in the hydraulic oil and the gum, asphalt, carbon residue, etc. produced by the chemical changes of the hydraulic oil itself, thereby preventing the occurrence of valve core jamming, blockage of throttling small hole gaps and damping holes, and rapid wear of hydraulic components. The filter element adopts glass fiber filter material, which has the advantages of high filtration accuracy, large oil flow capacity, small original pressure loss, and large pollutant capacity. Its filtration accuracy is calibrated based on filtration accuracy, with a filtration ratio of β 3, 5, 10, 20>200 and a filtration efficiency of n ≥ 99.5%, in compliance with ISO standards.
AfterSalesService :
Key words:- Pipeline filter
More Products
