Shaanxi medium voltage ultraviolet sterilizer manufacturer medium voltage ultraviolet sterilizer ultraviolet sterilizer

Description :

　　Shaanxi Medium Voltage UV Disinfector Manufacturer Medium Voltage UV Disinfector UV Disinfector Features: Medium Voltage UV Lamp Tube: Using high-quality American imported Lightsources brand UV lamp tubes with high power, reducing the number of lamp tube configurations, and can handle high flow water bodies. Compared with low-voltage ultraviolet lamps, ultraviolet light has a higher intensity and a wider wavelength of radiation.

　　Temperature probe: Immediately detect the temperature of the water to ensure that the equipment operates within the working temperature range of 0-45 degrees.

　　UV intensity probe: The intensity monitor used in the medium voltage UV sterilizer only responds to specific UV wavelengths that have sterilization effects. It can be connected to computers and PLCs, saving power consumption for the operation of the system.

　　Quartz sleeve: In order to better protect the ultraviolet lamp tube, there is a quartz sleeve outside each ultraviolet lamp tube. Shaanxi medium voltage ultraviolet sterilizer manufacturer. Therefore, the quality of quartz tubing largely determines the sterilization effect of medium voltage ultraviolet sterilizers. High quality quartz tubing can ensure that the penetration rate of ultraviolet rays reaches over 90%.

　　Daily cleaning: Due to water quality and exposure to ultraviolet light, the surface of the quartz sleeve will crystallize after a period of use. The thickness of the crystals will reach a certain level, which will affect the penetration ratio of ultraviolet light. Therefore, the quartz sleeve needs to be cleaned regularly. The medium voltage ultraviolet sterilizer is equipped with an automatic cleaning system, which can automatically clean the quartz sleeve at regular intervals based on the readings of the ultraviolet intensity detector. During the cleaning process, the system operates normally without the need for water supply or manual intervention, greatly reducing the workload of on-site personnel.

　　Shaanxi medium voltage ultraviolet disinfection equipment manufacturer: The difference between medium voltage ultraviolet disinfection equipment and low-pressure ultraviolet disinfection equipment. In terms of sterilization intensity, due to the higher photoelectric conversion rate of low-pressure ultraviolet lamps than medium voltage ultraviolet technology, low-pressure ultraviolet technology is often used in some industrial water treatment. Medium pressure ultraviolet radiation has its special advantages for disinfecting swimming pool water.

　　1) Low voltage ultraviolet lamps have high sterilization efficiency at a wavelength of 253.7mm, but only output a single frequency spectrum in a single straight line; The medium voltage ultraviolet lamp has a wide wavelength range and can kill many bacteria. For low load slightly polluted water bodies such as swimming pools, it is sufficient to meet the sterilization requirements

　　2) Low voltage ultraviolet lamps have little effect on degradation; The output wavelength range of medium voltage high-intensity ultraviolet lamps is wide (230-400m), containing wavelengths of 245mm, 297nm, and 340mm required for degradation. Photooxidation can effectively promote the decomposition of other organic compounds. The decomposition wavelengths are in the UVC, UVB, and UVA ranges, so medium voltage ultraviolet radiation has the ability to decompose and combine compounds. The medium pressure ultraviolet technology is far superior to the traditional low-pressure ultraviolet technology in terms of decomposition. The experiment used the same power (1200W) of medium and low-pressure ultraviolet to photodecompose in the swimming pool. The effective decomposition rate of medium pressure ultraviolet (mg/L level) can reach 74%, which is much higher than the degradation effect of low-pressure ultraviolet.

　　3) Effectively improve the ultraviolet penetration rate of swimming pool water quality. Penetration rate is one of the standards for evaluating water quality, and it is not exactly the same as turbidity. Turbidity is a characterization of suspended solids in water and does not represent dissolved substances in water. Ultraviolet radiation can oxidize organic matter in water and also destroy the structure of some substances that can cause water turbidity. Combined with filtration technology, it can improve the penetration rate of water quality. Medium pressure ultraviolet radiation can increase the penetration rate of water quality from 75% to over 97%

　　4) The Effect of Temperature on Sterilization Efficiency

　　The water temperature of a typical swimming pool is 26-28 ℃ or higher, which is higher than the evaluation temperature for the effectiveness of general disinfectants and disinfection methods (in general, tap water and sewage are lower than this temperature). The production of medium voltage ultraviolet sterilizers in Shaanxi is affected by temperature, while the efficiency of low-pressure ultraviolet lamps is greatly affected by temperature. However, the efficiency of medium voltage ultraviolet lamps is not affected by temperature.

AfterSalesService :

• Shaanxi medium voltage ultraviolet sterilizer manufacturer