Manufacturers offer catalytic combustion discounts for Xiamen catalytic combustion

Description :

　　Catalytic combustion is a purification method that uses catalysts to oxidize and decompose combustible substances in exhaust gas at lower temperatures. So, catalytic combustion is also known as catalytic chemical conversion. Due to the acceleration of the oxidation decomposition process by the catalyst, most hydrocarbons can be completely oxidized by the catalyst at temperatures of 300-450 ℃.

　　Compared with the thermal combustion method, catalytic combustion requires less auxiliary fuel, consumes less energy, and has smaller equipment and facilities. However, the promotion and application of this method in industrial production processes have been affected by issues such as catalyst poisoning, replacement of catalytic beds, and high cleaning costs.

　　Product performance characteristics:

　　1、 Easy to operate, with automatic control and reliability during device operation.

　　2、 The device starts up and takes 15 to 30 minutes to heat up to the ignition temperature, with energy consumption from the fan power. It automatically compensates when the concentration is low.

　　3、 The honeycomb ceramic carrier catalyst impregnated with advanced precious metals palladium and platinum has a large specific surface area, low resistance, and high purification rate.

　　4、 The waste heat can be returned to the drying oven, reducing the power consumption in the original drying oven, and can also be used as a heat source for other purposes. 5、 Long service life, catalysts are usually replaced every two years, and the carrier is renewable. 6、 Not producing secondary pollutants such as nitrogen oxides (NOX): 7. High performance, purification efficiency of over 99%; 8. Heat recovery rate, heat recovery efficiency ≥ 95%.

　　Nine occupies a small area: 70% to 80% of similar products in the same industry, and there are no special requirements for equipment foundation.

　　After the solid surface adsorbs the adsorbate, a portion of the adsorbed adsorbate can detach from the adsorbent surface, which is now attached. After a period of adsorption, due to the concentration of surface adsorbates, their adsorption capacity significantly decreases and the requirements for adsorption purification are met. At this time, certain measures need to be taken to desorb the adsorbates already adsorbed on the adsorbent to enhance its adsorption capacity. This process is called adsorbent regeneration. Therefore, in practical adsorption engineering, it is the cycle of adsorption regeneration and repeated adsorption that is used to remove pollutants from the exhaust gas and recover useful components from the exhaust gas.

AfterSalesService :

• Catalytic combustion equipment