Piston type pneumatic grouting pump

Description :

　　A large-scale pump enterprise integrating production and manufacturing, technology research and development, and project design. Its main products include slurry pumps, double suction pumps, desulfurization pumps, pipeline pumps, chemical pumps, clean water pumps, gravel pumps, mud pumps, submersible sewage pumps, UHB mortar pumps, FSB fluoroplastic corrosion-resistant pumps, ZJW impurity pumps, and other water pumps and accessories, as well as providing engineering consulting services. De Neng is fundamental, quality is life is the consistent business philosophy of Bafang Pump Industry, providing excellent products and services for our partners.

　　Technical parameters of cast iron mud pump for sand pumping and sand washing in sea and other water areas. 2. Sedimentation and dredging of rivers, lakes, reservoirs, hydropower stations, ports, and other areas. 3. Engineering construction drainage of sediment, mud, engineering construction drainage, and drainage of sediment during bridge pier construction. 4. Cleaning of sediment in municipal pipelines and rainwater pump stations. 5. Cleaning of sediment in factory sedimentation tanks, mine clear water tanks, dredging of rivers, sand mining at the seaside, cleaning of sediment in reservoirs, and well cleaning. 6. Steel slag, waste slag, thermal power plant fly ash, tailings, coal washing, mineral processing, gold mining, etc. Precautions for the use of mud pumps: After the pump is running normally, the power supply voltage and working current should be observed at all times. Main uses of lakes and rivers: 1. Check if the flow rate and vibration of the river water pump are normal. If any of the following situations occur, stop the machine immediately for inspection.

　　Operation Method:

　　1. Pre start inspection: All connecting parts should be tightened; The direction of electric rotation should be correct; The clutch is flexible and reliable; The pipeline connection is firm, the sealing is reliable, and the bottom valve is flexible and effective.

　　Before starting the submersible mud pump, the suction pipe, bottom valve, and pump body must be filled with water, and the upper end of the pressure gauge buffer must be filled with oil.

　　3. Rotate the piston back and forth twice by hand, with no obstruction and good insulation of the circuit before starting it with no load. After starting, gradually increase the load when the operation is normal.

　　4. During operation, attention should be paid to the sealing condition of each sealing device, and adjustments should be made if necessary. The pull rod and auxiliary rod should be regularly lubricated with oil.

　　5. Regularly test the mud sediment content during operation, which should not exceed 10%.

　　6. In order to ensure reliable splash lubrication, the mud pump should be operated at several different speeds for at least 30 seconds during each shift.

　　7. It is strictly prohibited to change gears during operation. When changing gears, stop the pump and shift gears.

　　It can be used for transporting high viscosity fluids and media containing hard suspended particles or fiber media, and can handle working conditions that other pump types cannot adapt to. Its flow rate is proportional to the rotational speed. And its outstanding advantages are that it does not form eddies when transporting media, is insensitive to the viscosity of the media, and can transport high viscosity media. After years of technological accumulation, the single screw pumps produced by Zhongcheng Pump Industry have formed advantages such as high performance, low energy consumption, and high cost-effectiveness.

AfterSalesService :

• grouting pump